|Posted on Sunday, September 28, 2014 - 11:07 pm: ||
I'm in the process of replacing the rotor hardware on my front wheel (unfortunately not the EBR as it's still out of stick), and have a question. I'm either blind, or the service manual is missing a couple points regarding R/R of the rotor itself. I found a thread that included the EBR hardware instructions that states that the step on the rotor surface faces outward (question #1 answered). However, I can't seem to find documentation as to where the dot on the rotor is supposed to be aligned. I found one reference on another board stating it was originally supposed to be aligned with the valve stem. Can you all confirm alignment spec for the rotor dot?
(Message edited by noobuel on September 29, 2014)
|Posted on Monday, September 29, 2014 - 06:59 am: ||
Rumor is it should be lined up with the valve stem.