G oog le Buell 1125R Forum | Login/out | Topics | Search | Custodians | Register | Edit Profile


Buell Forum » 1125R Superbike Board » Archive through July 21, 2014 » Stock body fasteners... « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Sir_wadsalot
Posted on Friday, June 13, 2014 - 09:01 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Where do I get the screws for the airbox cover and whatnot? Just the stock ones, nothing fancy.
Top of pagePrevious messageNext messageBottom of page Link to this message

Dhays1775
Posted on Friday, June 13, 2014 - 07:02 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

http://americansportbike.com/newdir/Item/17326

You may also be able to find them at a hardware store...
Top of pagePrevious messageNext messageBottom of page Link to this message

Sl33py
Posted on Thursday, June 26, 2014 - 03:56 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

American Sport Bike is a great company and happy to support them usually... But at 3.81 ea it gets $ quick. Especially as many as i've managed to lose...

I found Aluminum versions (a bit of weight savings). Have them at home and will confirm size/specs and provide here.

HTH - Rob
Top of pagePrevious messageNext messageBottom of page Link to this message

Sir_wadsalot
Posted on Tuesday, July 01, 2014 - 08:58 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Thanks guys.
Top of pagePrevious messageNext messageBottom of page Link to this message

Sprintst
Posted on Tuesday, July 01, 2014 - 09:31 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I don't know. I believe the correct call out is a Button Socket Cap shoulder Screw

I can't find one that matches, it's an either or


Button Head Socket Cap Screw:



Socket Shoulder Screw:



(Message edited by sprintst on July 01, 2014)

(Message edited by sprintst on July 01, 2014)
Top of pagePrevious messageNext messageBottom of page Link to this message

Sl33py
Posted on Thursday, July 03, 2014 - 03:21 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I went with the button head m6 x 1.0 x 16mm
http://www.probolt-usa.com/aluminium/aluminium-bol ts-dome-head/alloy-dome-head-bolt-m6-x-1-00mm-x-16 mm-pk-x-10-black.html


14.18 for a 10 pack = 1.42 ea (<1/2 cost of oem) uses 4mm alen key head.

2.5g vs OEM 7g (both w/ washers):



too many pics?...

measured length and head width.


Length for both is ~20mm.
head width - AL one is about 2mm larger (14 vs 15.9)

because of the slight shoulder the OEM threaded length is 12.36mm vs 14.9

perhaps a bit overkill... but only took a sec w/ my phone to snap these.

2.5g x (how many bodywork bolts?) vs 7g x same #. 4.5g savings ea (453.5g = 1 lb) - so 100 of these to save a lb. Not really practical (not that many i'm sure), but hey it's less expensive AND lighter!

Hope it helps next guy looking for bodywork fasteners. And they come in colors!
Top of pagePrevious messageNext messageBottom of page Link to this message

Sprintst
Posted on Thursday, July 03, 2014 - 07:36 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Sl33py - I think that's an adequate solution.


Everyone just needs to remember that the stock bolts are shoulder bolts, so they provide a torque stop to keep you from overtightening them and cracking the plastics. Those replacements bolts don't have that, so just be aware and don't over tighten
Top of pagePrevious messageNext messageBottom of page Link to this message

Nuts4mc
Posted on Thursday, July 03, 2014 - 09:52 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

McMaster-Carr has nylon shouldered spacers in various lengths a 6mm bolt is very close to a 1/4" bolt in Dia. (just in case you want that extra protection)

http://www.mcmaster.com/#shoulder-spacers/=socnhi
Top of pagePrevious messageNext messageBottom of page Link to this message

Ak_addict
Posted on Thursday, July 03, 2014 - 03:35 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Add a shoulder, also from Pro-Bolt.
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Password:
E-mail:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration