| Author | Message | ||
     Firemanjim |
So I have Tunerpro all loaded and hooked to bike and it is seeing everything. Got ADX and XDF all lined up. Have even managed to make some changes, but cannot seem to figure out the sequence of saving said changes so they show up again. Seemingly no matter how I save it and what I name the bin file, when I open it back up and look changes are magically gone. Have no idea how I even made changes that showed!!! So help a poor fool out. And ,yes I read and re-read the help guide. | ||
| Firemanjim |
Not a peep from anyone? Someone must be using this program! | ||
| Oldog |
Jim check to see where the file is being saved to and opened from, I know its simple but years on it still bites me once in a while. ( you think the file is in folder a, and the computer is opening the file in b... ) | ||
| Oldog |
no I am not a tune pro user, my 25 runs ok for me.... | ||
| S21125r |
Fireman - It's been the better part of a year since I tinkered with TP but I used ECM Read for Mono to download the file, made the changes/saved in Tuner Pro, and then used ECM Read to write the new file back. I know xopti had a slew of utilities and I believe one of them was a read/write directly from Tuner Pro so not sure which method you used. Vaguely recall TP defaulting to a .bin extension on the end of the file name so you may need double check what extension it saving in. Hope this helps. |
