| Author | Message | ||
     Smoke4ndmears |
Hoping to lean on the kindness of some of you who have parts books. I've sourced most of what I need except for the gauge shroud, and the unique CR ignition barrel assembly. Kicking myself for not getting them in the past when I've seen them on eBay. Any help appreciated! (Message edited by smoke4ndmears on October 16, 2013) | ||
| Froggy |
DASH PANEL, COSMETIC COVER M0189.1ATA Just under $12 | ||
| Smoke4ndmears |
Sweet, thanks! Surdyke has it for $9.42! Even better! Any number for the CR ignition barrel? (Message edited by smoke4ndmears on October 16, 2013) | ||
| Smoke4ndmears |
Nevermind, found it! Y0724.T Same for lightnings and ulys it looks like. | ||
| Skntpig |
Anyone have the part number and price for the headlight itself? Mine is degrading. | ||
| Dhays1775 |
I was wondering the same thing for the CR headlight assembly. I've got a 55w HID in the low beam position, and on the center section it appears to have burnt the chrome plating off the plastic. Might have to replace it and go with a 35w ballast... Worst case scenereo, I just find a way to implement an actual DOT approved HID unit into the low beam position. Time (and the wife) will tell... Hahahaha | ||
| Smoke4ndmears |
35w ballast burnt out my 1125r headlights fyi. | ||
| Froggy |
I've seen the stock bulbs degrade the housing too. I'm not sure if HID speeds up the process, but it is not the cause. | ||
| Zac4mac |
My 2¢ I have had HID 35W in Loretta's lo-beams since mid-Summer 2008, 6k miles. 28k miles total and ZERO degradation in reflector silver. I just did a "close" inspect Sunday. Z |
