| Author |
Message |
    
Ezblast
| | Posted on Saturday, August 31, 2013 - 07:58 pm: | 
|
GPR #1
EZ |
Kruizen
| | Posted on Saturday, August 31, 2013 - 09:14 pm: |
|
which bracket are you talking about? the one that mounts to the fork? or to the frame?
fork ones are easy to get. FYI |
Sir_wadsalot
| | Posted on Tuesday, September 03, 2013 - 09:24 am: |
|
Get where? This needs details or it's own thread.... |
Kruizen
| | Posted on Tuesday, September 03, 2013 - 12:19 pm: |
|
54mm fork clamp
http://www.ebay.com/sch/i.html?_trksid=p2050601.m5 70.l1313.TR0.TRC0.X54mm+fork+clamp&_nkw=54mm+fork+ clamp&_sacat=0&_from=R40
I'd be interested in the bracket that mounts to the frame. |
Thefleshrocket
| | Posted on Tuesday, September 03, 2013 - 11:06 pm: |
|
Yeah, the part that mounts to the frame is what we'd need! |
Jdugger
| | Posted on Wednesday, September 04, 2013 - 07:54 am: |
|
This?
http://www.ebay.com/itm/Ohlins-replacement-steerin g-damper-mounting-bracket-/380700981693?pt=Motorcy cles_Parts_Accessories&hash=item58a38bf9bd&vxp=mtr |
Cherry_bomb
| | Posted on Wednesday, September 04, 2013 - 08:14 am: |
|
this one... |
Jdugger
| | Posted on Wednesday, September 04, 2013 - 09:06 am: |
|
That's an EBR-made part.
What you can do instead is drill your fairing stay in the center section where it bridges between the tank/chassis and the fairing support bracket. It's thick and strong there, and a simple spacer/stud will do the bo nicely.
If you don't like that idea, it's also square there, so make a simple bracket out of Aluminum and use set-screws on the side to hold it in place. |
|
