G oog le Buell 1125R Forum | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Natc Posted on Saturday, June 08, 2013 - 11:25 pm:        I've installed a new stator from Rick's and the EBR rotor mod, using all proper loctite and torque specs (Dear god my DeWalt better have torqued to its max 300 ft lbs). My problem was melted stator wiring. I have not had the HD harness fix. I did not install a new voltage regulator. Should I expect to have other issues, or should I be good without a new VR? Any input is appreciated. Thank you!   Yugi Posted on Sunday, June 09, 2013 - 02:04 am:        You should be OK.   Sinnister Posted on Sunday, June 09, 2013 - 04:24 am:        VR. At least that's what my issues seem to be right now. You may not necessarily be out of the woods yet. Definitely keep an eye on it still. My VR went about 1500 miles after doing what you did.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: