G oog le Buell 1125R Forum | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Mortbike Posted on Tuesday, April 23, 2013 - 07:12 pm:        I just finished installing the EBR rotor and torqued the nut in neutral with the DeWalt 300 ft lb impact wrench. No problem, so far. How long do we have to let the Loctite 272 cure before we can run the engine? Mort   Dannybuell Posted on Tuesday, April 23, 2013 - 08:17 pm:        What is the temperature of the garage the bike is in? .... http://www.reyher.de/download/Technical_data_sheet _Loctite_272.pdf   Mortbike Posted on Tuesday, April 23, 2013 - 08:22 pm:        Temperature in the garage here in south Florida is approx 80 degrees Fahrenheit.   Dannybuell Posted on Tuesday, April 23, 2013 - 09:18 pm:        read the link!   Mortbike Posted on Tuesday, April 23, 2013 - 09:30 pm:        Thanks Dannybuell, I read the link. Looks like 24 hours should be a safe cure time so I will start her up tomorrow evening. Mort   Dannybuell Posted on Wednesday, April 24, 2013 - 04:28 pm:

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: