| Author | Message | ||
     Kruizen |
Ran at the track all day yesterday and no issues except for the last session, pull out for the last session and my cluster went completely black? It was on when I started the bike, until I got onto pit row, shut it off turn it on and nothing, not even the tach works. Bike ran fine, but nothing on the cluster. Pulled the front fairing and checked the plug, it's plugged in, anyone have any ideas. Tried to search but am using my phone and its not cooperating. | ||
| Kruizen |
Pulled all fuses, none blown but its working now, no idea why. | ||
| Two_seasons |
Maybe had a little bit of corrosion on one or more of the spades at the fuse box. | ||
| Austin1125r |
I had a problem with mine where it would zero out the speed when I was riding. I unplugged the cluster and rode it for a bit then plugged it back in and it has worked ever sense. | ||
| Cutty72 |
Speed going to zero without any other issues is a speed sensor going out. Had that for awhile, it progressively got worse. Changed it out and no more issues. | ||
| Kruizen |
This wasn't a zero issue, it was the entire cluster was just black: no nothing. It's weird but after I got it to start working again, I then lost power to the accessory plug I use for my lap timer. | ||
| Kevmean |
Lack of power to the accessory plug could be an indication of low system voltage as the software in the ecm was changed so that power to the plug is only there if the bike is over a certain voltage. | ||
| Monstergirl |
where is the speed sensor located? I need to probably clean mine off and then eventually get a new one |
