G oog le Buell 1125R Forum | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Mortbike Posted on Monday, March 25, 2013 - 11:29 am:        Is it absolutely necessary to remove the stator wiring from the chassis to get the rotor cover off? My bike is charging fine and I am hoping my stator is still in good condition(though I will make a close inspection) and that all I have to do is install the EBR rotor and it would be nice not to have to pull the stator wires out of the harness. Is there enough free play in the wire to pull the cover off and swing the cover to the side to allow for the rotor sway out? thanks Mort   Zac4mac Posted on Saturday, March 30, 2013 - 06:23 am:        yes - stator is wrapped in a rag -

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: