| Author |
Message |
    
Kevmean
| | Posted on Tuesday, March 19, 2013 - 12:00 pm: | 
|
For anybody looking for subframes here is a set 
http://www.ebay.co.uk/itm/2006-BUELL-XB12X-XB-12-X -ULYSSES-SUB-FRAME-SUBFRAME-TAIL-MOUNT-BRACKET-/38 0600599642?pt=Motorcycles_Parts_Accessories&hash=i tem589d90445a |
Carbonfibrebob
| | Posted on Tuesday, March 19, 2013 - 12:06 pm: |
|
If anyone is interested, I have an extra pair of sideframes that I do not need any longer. |
Cravacor
| | Posted on Friday, March 22, 2013 - 10:00 am: |
|
BRAVO! Well done sir!
 |
Pwillikers
| | Posted on Friday, March 22, 2013 - 10:27 am: |
|
Most excellent Bob! Very tidy fabrication on the brackets, especially those flat socket cap screws. It's tough to machine the bracket to accept them as cleanly as you've done. Some kind of special bit?
I've seen that wind screen before. Who makes it and do you like it? Does it deflect the gust? Sustained 90MPH can be wearing on a fella. |
Carbonfibrebob
| | Posted on Friday, March 22, 2013 - 09:12 pm: |
|
It's a Laminar Lip made specifically for the CR. It does a good job of air deflection. I've seen a GPS indicated 138 with it and it helped. I had to back it down after experiencing a little wind on the arms induced weave. I could cruise all day at 80+ with it, but I love naked bikes.
As for the flat heads, I used an 82 degree single flute counter sink. Pretty basic stuff.
Thanks for all of the nice comments everyone, I appreciate them.
Bob |
Jornum1
| | Posted on Saturday, March 30, 2013 - 10:57 pm: |
|
Nice work, glad to see this mod catching on. I have a season on mine with no issues. Enjoy!
ALso two thumbs up for the laminar, I love mine. I wish it was a little taller sometimes, but it at least takes the wind off my chest(6'2"). |
|
