| Author | Message | ||
     Mortbike |
Do wide band O2 sensors fit in the exhaust bungs of a 2009 1125CR? I may go for a dyno analysis and my tuner likes to put the wide band senors on the headers- thanks Mort | ||
| Boogiman1981 |
yes and iirc the rear sensor on the 09-10 model headers is where it can actually be reached but i'm not positive. he may possibly need an adapter but i think it's fair to say he should have one. | ||
| D_adams |
They are standard 18 mm x 1.5 mm O2 sensors. I changed mine out quite a while back, it's an 08 and I did it without rotating the engine or anything else. The only thing I think I took loose was the right foot bracket assembly and the little shroud right in front of the engine/swingarm bolt. |
