Author |
Message |
Foxtrot
| Posted on Monday, July 02, 2012 - 03:39 pm: |
|
Hey Guys, I am leaving for Marine basic training early this winter. Right now my 09 buell 1125r needs new tires so while it is in the shop I want it to be fully serviced. Since it is not an HD shop I would like to know what I should have done to get it in perfect order. Oil change, break pads and what else???? Money isn't a big deal, i had some set aside for this so anything you can think of. I'm dropping it off tomorrow. Thanks |
Froggy
| Posted on Monday, July 02, 2012 - 03:43 pm: |
|
The service manual and owners manual has a listing of all things that need checking and replaced depending on mileage. |
Foxtrot
| Posted on Monday, July 02, 2012 - 03:49 pm: |
|
Yes, but i don't have one and the one linked to the forum is not working right now. And since it goes into the shop tomorrow i'm kind of out of options. |
Froggy
| Posted on Monday, July 02, 2012 - 04:01 pm: |
|
Worked for me, here is what it says:
Regular Service Intervals: 2009 Buell 1125 Models | ITEM SERVICED | PROCEDURE | 620 MI. | 6,200 MI. | 12,400 MI. | 18,600 MI. | 24,800 MI. | 31,000 MI. | 37,200 MI. | NOTES | Engine oil | Replace | X | X | X | X | X | X | X | 1 | Engine oil filter cartridge | Replace | X | | X | | X | | X | | Air cleaner | Replace filter element as required | | | X | | X | | X | | Crankcase breather | Clean or replace | | | X | | X | | X | | Tires | Check condition, check pressure and tread | X | X | X | X | X | X | X | | Clutch fluid | Check level | X | X | X | X | X | X | X | 3 | Rear belt and sprocket | Inspect | X | X | X | X | X | X | X | 2 | Throttle, brake, clutch controls, sidestand | Inspect, service as required | X | X | X | X | X | X | X | 2 | Brake fluid | Check levels and condition | X | X | X | X | X | X | X | 3 | Brake pads and discs | Inspect for wear | X | X | X | X | X | X | X | | Spark plugs | Replace | | | X | | X | | X | 2 | Electrical switches and equipment | Check operation | X | X | X | X | X | X | X | | Front fork oil | Replace | | | | X | | | X | 2 | Exhaust system | Inspect for leaks, cracks, and loose or missing fasteners or heat shields | X | X | X | X | X | X | X | 5 | Battery | Check battery and clean connections | | | | | | | | 5 | Cooling system | Inspect level, check clamps for tightness | X | X | X | X | X | X | X | 2 | Coolant | | Replace every 24,800 miles 50,000 kilometers | 2, 6 | Radiators and oil cooler fins | Clean | X | X | X | X | X | X | X | | Brake system and oil lines | Inspect for leaks | X | X | X | X | X | X | X | 2 | Critical fasteners | Check tightness | | | X | | X | | X | 2 | Valve clearance | Inspect | | | X | | X | | X | 4, 2 | Road test | Verify component and system functions | X | X | X | X | X | X | X | NOTES: 1. Perform annually or at specified interval, whichever comes first. 2. Should be performed by an authorized Buell dealer, unless you have the proper tools, service data and are mechanically qualified. 3. Change D.O.T. 4 fluid and flush brake and clutch systems every two (2) years. 4. Could vary with frequency of operation and riding style. 5. Perform annually. 6. Perform every two years or at specified interval, whichever comes first. |
|