G oog le Buell 1125R Forum | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Jossi Posted on Thursday, May 24, 2012 - 05:07 pm:        Hi do i need to remove the intake solenoid if i have EBR ecm with the latest flash Regards Jossi   Froggy Posted on Thursday, May 24, 2012 - 05:11 pm:        Nope. All EBR ECMs are programmed to not use the solenoid, and disconnecting it will not throw a check engine light.   Jossi Posted on Friday, May 25, 2012 - 12:37 am:        So i dont need to do anything ,i can just disconnect it if i want Thanks Froggy Regards Jossi   Cataract2 Posted on Friday, May 25, 2012 - 01:32 am:        You can pull the solenoid and put in the resistor to prevent the check engine light   Zecca Posted on Friday, May 25, 2012 - 07:13 am:        why remove? Increase the power? Faster aceleration?   Chessm Posted on Friday, May 25, 2012 - 01:22 pm:        it removes a pound or two from your bike which translates to 2 seconds off of your quarter mile times. although your results may vary.   Ratgin Posted on Friday, May 25, 2012 - 01:38 pm:        humm if i removed a "pound or two" of weight from myself.. my bike would be 1.5 minutes faster in the 1/4 mile using that formula.   Gofastalot99 Posted on Friday, May 25, 2012 - 02:31 pm:        You can take the solenoid and cable off and zip tie the throttles together. If you really take your time it should be less than an hour. There is really no legitimate reason for the thing to be there anyway and with the EBR ECM it isn't used. I think the total weight was 1lb 12.5 ounces.   Jossi Posted on Saturday, May 26, 2012 - 01:08 am:        Hi again like Froggy write if the solenoid is disabled it can still be there i can disconnect it later

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: