G oog le Buell 1125R Forum | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Bolt_axtion Posted on Monday, April 30, 2012 - 01:02 am:        My service manuel is absolutely no help and I don't have an owners manual and the link on this site is F-upped. What does the yellow light below the gas light and above the red temp light mean? Its above the "9" on the tach. I can't get it to shut off and am afraid to ride it. Please email if you know.   Jaredc01 Posted on Monday, April 30, 2012 - 01:28 am:        The "Check Engine" lamp (henceforth known as the "CEL"), yes? As for the owners manual, use the 2009 link.   Bolt_axtion Posted on Monday, April 30, 2012 - 01:40 am:        Thanks for the help.I wasn't sure. Any clue why it wants to die at idle when i pull to a stop? It's got me baffled.   Timebandit Posted on Monday, April 30, 2012 - 01:48 am:        You've got the service manual, so do you know how to pull codes from the ECM?   Ratbuell Posted on Monday, April 30, 2012 - 08:15 am:        You can do that with an owners manual. I'm pretty sure there's a section in the OM about "Diagnostic Trouble Code Display". It involves button press/hold on the instrument panel at key-on...don't remember offhand, but I know it's in the book. Get the code and post it, then we can help. (and once you have the code...the shop manual can help too!)   Bolt_axtion Posted on Monday, April 30, 2012 - 11:08 am:        Thanks guys. I'll post the codes when I get them figured out. I just got the bike and figured I better get a manual for it also. Guess it might pay off I hope. I'll start reading it today.   Jaredc01 Posted on Monday, April 30, 2012 - 11:24 am:        I'm actually wanting a service manual myself... Where did you get yours from?   Bolt_axtion Posted on Monday, April 30, 2012 - 02:28 pm:        Service manual is actually no help for pulling codes. It says to refer to electrical diagnostic manual. Great huh. How do I pull codes? Anyone know.   Froggy Posted on Monday, April 30, 2012 - 02:40 pm:        Hold down the two buttons on the dash, turn the key on, the bike will enter diagnostic mode. You can tab through to view the trouble codes.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: