G oog le Buell 1125R Forum | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Jcjohnson33 Posted on Monday, December 19, 2011 - 11:15 pm:        Anyone have a few picks on how the throttle cables route around the ignition switch? Mine are not correct and want them better routed than I have them now. And it's an R   Nm5150 Posted on Monday, December 19, 2011 - 11:28 pm:        I don't have a pic but after mounting a steering damper mine would catch a little so I just put a zip tie around everything and didn't pull it all the way tight and it keeps them from snagging on anything when I turn the barsHTH   Zac4mac Posted on Tuesday, December 20, 2011 - 02:00 am:        Here's a couple also showing where I removed material from the fairing stay. Pressure from the stays caused a couple of connections on the keyswitch to fail. No problems since. Z   Jcjohnson33 Posted on Tuesday, December 20, 2011 - 02:11 am:        Thanks zac that's what I was looking for. I need to trim my stay a little bit to. I have not had any problems but better safe than sorry

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: