G oog le Buell 1125R Forum | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Northernyankee Posted on Saturday, September 03, 2011 - 04:22 pm:        I am looking to get a Motion Pro Revolver and need to get the cable lengths, anybody know this so I don't have to pull the bike apart to measure? Thanks guys!   Duphuckincati Posted on Saturday, September 03, 2011 - 09:10 pm:        What's a "Motion Pro Revolver" and are you looking for R, CR clubman or CR highbar cable info? I have clubman CR I could measure.   Northernyankee Posted on Saturday, September 03, 2011 - 09:25 pm:        Here is a link to the revolver. http://www.motionpro.com/motorcycle/articles/view/ 1458/revolver™_variable_rate__vr__throttle_kits/ I need lenths for the standard R cables.   99buellx1 Posted on Monday, September 05, 2011 - 08:01 pm:        I took a couple pictures of the cables off my 08 R. Hope these help. Nothing was moved for all 3 pictures so you can calculate the sizes as needed. Overall length is 38 3/4", if it's not not that clear. I am also interested in getting a different turn rate throttle so let me know how your project turns out. http://www.ifmracing.com/pictures/Sept/Cables/2011 -09-04_17.54.53.jpg http://www.ifmracing.com/pictures/Sept/Cables/2011 -09-04_17.55.08.jpg http://www.ifmracing.com/pictures/Sept/Cables/2011 -09-04_17.55.18.jpg   Jdugger Posted on Monday, September 05, 2011 - 09:30 pm:        Save your money on the Motion Pro. They don't support our bikes. I tried this route already. They need lengths, but they also need wire vs cable lengths, and for both cables, then they want another $100 to make them. What are you trying to do? Just get a quick-turn throttle? I'm using the G2 tamer, but with an X50 (I think) cam. It's about 10% faster than stock, and NO annoying "ramp" up -- just a good old fashioned quick turn that gets you where you want to be much faster.   Northernyankee Posted on Friday, September 09, 2011 - 12:23 pm:        Thanks for the pics 99buellx1, they are exactly what I needed. Jdugger, I spoke with Motion pro and they are custom making me a kit. It is only $175 so $20 more then normal. I want the revolver for a few reasons but one of the main reasons is because I installed a Brembo RCS19 and I can't get the lever to angle down far enough because the stock throttle cables are in the way. So with the lever too high it hits the fairing stay when the bars are turned to the left.   Nuts4mc Posted on Friday, September 09, 2011 - 12:45 pm:        2006 and newer Yamaha R6 came with a "quick turn" (1/6 turn) throttle tube - don't know if it'll work on the 1125....??? here's link with some good pix on the upgrade: http://www.1000rr.net/forums/showthread.php?t=7044 2 good luck   Buell101 Posted on Friday, September 09, 2011 - 01:24 pm:        Cheap 1125R quick throttle: R1 throttle $6, and take a dremmel to it. Done   Buell101 Posted on Friday, September 09, 2011 - 01:32 pm:        If you want to put a complete R1 throttle on and save room on the bars heres the dims for the cables, send to motion pro   Rick_fears Posted on Saturday, May 14, 2016 - 05:20 pm:        Has anyone done the 1125/R1 throttle setup from motion pro? I'm also having cable clearance issues.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: