G oog le Buell 1125R Forum | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Mhpalin Posted on Wednesday, August 03, 2011 - 05:23 pm:        Would a 08r eebbrr ecm work on a 09r Thanks Mike   Froggy Posted on Wednesday, August 03, 2011 - 05:32 pm:        Yes   Avc8130 Posted on Wednesday, August 03, 2011 - 06:05 pm:        Caution: Depending on when the ECM was "created", it may or may not have the 09 stator harness control logic. ac   Mhpalin Posted on Wednesday, August 03, 2011 - 06:13 pm:        Thanks I got the ecm last year in late aug. so you would think it has ,any way to tell Mike   Avc8130 Posted on Wednesday, August 03, 2011 - 06:23 pm:        It depends. There are "ways". The simplest we can discuss is just to "try" it. It should be apparent if the stator control is working. At idle at some times the voltage readout should drop to ~12.2-12.4. When I installed mine in my 09 originally, it drove the relay completely wonky. Switching on and off repeatedly. Not sure what they had pin 21 set to do in the race ecm...but it certainly was NOT to control the stator harness properly! ac   Easyrider Posted on Thursday, August 04, 2011 - 03:21 am:        strange, the 2009 ECM for a 2009 Model 1125 use different injectors?. How is it possible that would work?. different calibration injectors, or am i missing something here?   Fastphil Posted on Thursday, August 04, 2011 - 03:30 am:        Different spray pattern only.09 injectors spray on intake valve for improved cooling.   Easyrider Posted on Thursday, August 04, 2011 - 03:39 am:        I see my mistype now, that is why you CAN'T use a 2008 ECM that is calibrated for a 2008 model 1125, in a 2009 or later model 1125. Simpel becuase the injector calibrattion software is different. Look inside the ECM to see what i mean (-:   Easyrider Posted on Thursday, August 04, 2011 - 03:39 am:        ofcourse you can go to a official dealer and ask them to reflash it.   Avalaugh Posted on Thursday, August 04, 2011 - 04:01 am:        But I have a 2008 bike with E.BR ECM but I installed the later 09 injectors and all is fine !   Fastphil Posted on Thursday, August 04, 2011 - 04:31 am:        As I said only the spray pattern is different,ecm adjusts the micro seconds the injector is open as per the fuel air needed.Ebr says they are a direct replacement   Easyrider Posted on Thursday, August 04, 2011 - 08:08 am:        Did somebody besides talking, did this in a dyno and monitored the AF ratio in the header?. and can tell me what happend there?.   J_copeland Posted on Sunday, August 07, 2011 - 05:59 pm:        I have an Erik Buell Racing ECM from an 08 with the base tune running on my 09 with a HMF pipe ! Runs great !   Avalaugh Posted on Monday, August 08, 2011 - 03:08 am:        Easyrider, mine has been run on a dyno with the new style injectors, I didn't have the AF readout though, made good power !!   Avc8130 Posted on Monday, August 08, 2011 - 10:00 am:        J_copland and Avalaugh, Do you have the stator harness in your 09s? Can you confirm whether the 08 Race ECM is controlling it properly? I can confirm beyond a shadow of doubt that mine did not. ac   Avalaugh Posted on Monday, August 08, 2011 - 12:13 pm:        Mines a 08 bike.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: