G oog le Buell 1125R Forum | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Crmike Posted on Wednesday, February 02, 2011 - 06:39 pm:        Hi everyone, I'm trying to convert my CR from having the high bars to the Clubman bars. Can I use the same clutch and brake lines and throttle cable or do I have to get shorter ones? Bars have already been purchased and are being shipped. I'd like to be able to get them on when they get here so if I need to get shorter cables I'd like to buy those too. Thanks Mike   Swalker Posted on Wednesday, February 02, 2011 - 07:00 pm:        I was able to use the same lines, but not throttle cables. Just had to re position the lines a little.   Crmike Posted on Wednesday, February 02, 2011 - 11:08 pm:        Awesome, thanks. Is there a fair amount of slack in the lines? Has anyone else tried this? Mike   Swalker Posted on Thursday, February 03, 2011 - 05:38 am:        Yea, there is some slack. I rotated them a little at the banjo bolts, and made wide sweeping turns with the lines.   Crmike Posted on Thursday, February 03, 2011 - 12:03 pm:        Excellent, thanks again. Can't wait for my new bars to come! Mike

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: