| Author | Message | ||
     Xoptimizedrsx |
new version is released on the v5 its 7.066 there is also a new plugin for the read/write out as well. the new plugin has a "are you sure you want to send data to the bike dialog box button now that pops up once you click the upload to bike arrow"' this makes sure you don't accidentally send a data you was viewing by accident. go get both new releases its all improved in many areas. It works on all buell bikes all years. | ||
| Hd8803rider |
What ECM Type Specific Information does one need to download off of EcmSpy to use TunerPro ver 5 to read the Ecm as I see there are several listed below the Specific Information area on their web site and like to make sure I get the right Bin Definition to use on my 1125R | ||
| Xoptimizedrsx |
from ecmspy all you need is the xdf that matches your bike. from tunerpro you need the v5 program and the plug-in files. from my site to datalog and ect as live data you need the adx file to fit your year range bike. if you do not know your xdf type dont worry. the first fetch will default into a save data page with out a xdf installed. when you start to save the file the firmware name is set in the name box. that's the xdf file type to download from ecmspy. if it saud error after you clecked read dont panic. look where you normally save files on a download and see if the file is there. If there just close the windows in tunerpro and go download the needed file from spy. not much more to it from there. A how to is started... will post eventually. mike | ||
| Xoptimizedrsx |
even nerer version is up now. 7.1???? Just some FYI the tunerpro will do Ducati bikes as well same cable i know but not sure on the plug. you will need the xdf. we are looking into doing a good xdf in compared to what was found online already. give us time it will come. as for duck details on how yet well thats not going to post just yet. but it will come. new toys are nice.... |
