| Author | Message | ||
     Zip88 |
I installed the DDM HID 35 watt 5k low beam 55 watt 6k high beam in my cr.I soldered the connections on the high beam. The high beam will ignite every time with the motor not running but, will not ignite with the motor running unless the high beam is turned on before starting.If I turn the high beam on before starting for about 10 seconds I can turn it off before starting and the beam will lite. The voltage is 13.2 and climbing after start. Please help « Previous Next | ||
| Skntpig |
some people had polarity issues and had to reverse the + and -. Not sure if this is the issue or not. |
