| Author | Message | ||
     T_man |
Can you simply pull a fuse to temporarily disable the lights for a track day? Thanks! | ||
| Froggy |
No, if you pull the headlight fuse the bike will not start. It is a safety feature. You should disconnect the headlamp harness at the front of the bike. | ||
| T_man |
Thats what I suspected, thanks Froggy! | ||
| D_adams |
Assuming you have an R, you'd want to remove the mirrors anyway, so you're only a few screws away from taking the front fairing off anyway. Pull it off, tape over the light housings, disconnect the plug and then use 2 zip ties and the screws on the bottom to hold the fairing on. | ||
| T_man |
I run with bar-end mirrors (huge improvement) so I am more than halfway there already. Its a revelation working with the 1125R's bodywork vs. Japanese sportbikes. Soo much simpler! | ||
| Boogiman1981 |
when i deleted my mirrors i bought a set of license plate mount bolts with the security pin torx heads no zip ties for me thanks |
