| Author | Message | ||
     Jrfarrow1987 |
im looking for a good set of t-handle torx head wrenches please give me a good source i dont want another set were the heads end up rounding causing me to round the bolts off | ||
| Steeltech |
http://buy1.snapon.com/catalog/tools.asp?tool=all& Group_ID=2134&store=snapon-store | ||
| Jrfarrow1987 |
thanks steel i laughed when i saw the price break for buying the set rather than individual pieces a whooping one dollar lol but gotta be good stuff coming from snap on | ||
| Boogiman1981 |
lol note the set doesnt include the t-30 we need | ||
| Stirz007 |
Sears - I like snapon better, but the Craftsman aren't bad.... | ||
| Hogzilla |
I've used Craftsman for years with no problems. Home Depot's Husky brand are quite impressive for the price. I've never had a hex or torx that was sized correctly round out. If it's sized properly and you're using the prescribed torque, you won't round anything out. | ||
| 99buellx1 |
Yeah, make sure you are using the T30 on the 1125's, the T27 (that XB's use) will work, but will be far more prone to rounding. | ||
| Stirz007 |
If you want to do this on the cheap, Just get a t-handle with hex socket/magnet set-up and just change bits as needed. | ||
| Dirty_john |
Snap On - got a full set last year - not cheap but good quality |
