| Author | Message | ||
     Dktechguy112 |
I finally got my highbar kit installed, the throttle was a pain to get set up. It took me 6 hours, but i finally got it, the key to a non stick throttle is to attach the new throttle cables to the handlebars first and then attach the cables to the throttle bodies. | ||
| Cme2c |
Be sure to check the length of your brake light wire with the bars at full R/L lock. On some bikes it's too short and pulls off the switch. | ||
| Nickg |
do a search on my posts on it. i posted pictures of the correct 2010 cable routing... |
