| Author | Message | ||
     Maxime75us |
First of all, until I do the mod. I would like to have the blinkers always ON. I find it safer, big time. Any idea to have that done? About the custom part. I would like to take off the whole front and put a vintage style headlight but with 2010 capability and keep "somewhere" the control"dash""" Then if anyone of you, could tell me where to put the blinkers and mirrors it would be great. Still trying to find an idea for the license plate. If anyone knows how to keep the blinkers on at all time on my xb9s , I would love it too!!! Thanks for your help, advices, comments. My best, Max 1125r 08 xb9s 03 | ||
| Froggy |
American Sport Bike sells (or used to) a kit for the XB that will turn your blinkers into 4 way flashers and running lights, but it isn't compatible with the 1125. | ||
| Smit3833 |
You can make a simple bracket and tuck the plate up under the tail pretty deep. | ||
| Drawkward |
www.customfighters.com Start there. Sounds like you're wanting to build a fighter. But let me say this, if you're wanting to do these mods you should know how to do them yourself. | ||
| Jules |
You could buy some of the Oberon bar end mirrors and indicators (combined) that'd be a relatively simple fit... Having the blinkers on all the time will be a challenge as the IC controls the blinker circuit. I think you might be better off looking at some additional running lights and leaving the blinker cct alone if you're that keen on increased visibility. There are a few aftermarket tail tidies out there that would replace the OEM fitmant, if you're going to go any more radical than that you'll either have to fabricate something yourself or have something made to your spec. | ||
| Maxime75us |
Thanks Jules, Drawkward,Froggy and smith3833 I guess , will not mess with the ecm... Thanks guys |
