G oog le Buell 1125R Forum | Login/out | Topics | Search | Custodians | Register | Edit Profile


Buell Forum » 1125R Superbike Board » Archives 001 » Archive through April 02, 2010 » 1125R First Service Questions « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Billp
Posted on Thursday, April 01, 2010 - 07:49 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

My 09 1125R, purchased oct 2009, needs to go in soon for the first service. I've received the letter for the wiring harness fix so I might as well let hd do the oil change while its there. I'll switch to full syn sometime in the future.

1. Flashing. How do I determine what flash my bike has ? I don't have any issues but it would be nice to know what flash my bike is on and what the current flash is.

2. Clutch cover weeping. Mine is ok for now, I do have a c-hair of fluid under the cover..maybe even a single drop. But should it be completely dry there ? I would assume so. How do I tell if I have the older or newer clutch cover ?

Thanks
Bill,Chlt NC
03XB9S,09XB1125R
Top of pagePrevious messageNext messageBottom of page Link to this message

Billp
Posted on Thursday, April 01, 2010 - 08:56 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Update on the clutch cover. After riding to work this morning I popped the cover and looked. Theres no fluid there, just a vapor on the inside of the cover and some boooger-like crud on the bottom of the case opening.

That vapor must be what I saw before. Should I wipe that off later and observer it to see if it returns ?

Or I should stop thinking about it kuz if it does leak for real I'll be pretty obvious.
Top of pagePrevious messageNext messageBottom of page Link to this message

Black
Posted on Thursday, April 01, 2010 - 06:55 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

The dealer can tell you what flash you have. I suppose you can buy some extra equipment to do that. As I recall (somebody help me out) With the 08s, the flash was an issue because the first bikes ran very lean, so you had really hot pipes, and they got fairly low mileage as they were set up to burn up a track vice putter around the neighborhood, and meet EPA pollution requirements. That is a bit of an oversimplification, but Buell rapidly instituted several flashes that lowered the engine temps and improved mileage, while not getting in trouble with the EPA. There was great wailing and gnashing of teeth in the media and among some riders at first. However, it was fixed fairly quickly. I think it was much ado about nothing....but it happened. I am happy with my dealership. My bike runs like a champ. However, you have to remember that this is a performance machine and not an old Buick, so you have to ride them and keep the RPMs up. As far as clutch covers go, there are a brazillion threads about that here. Here is what I think I know: There was an original cover, replaced by a "B" cover, and then a "C" cover. The cover is cute, but not the issue. The leak was in the hydraulic actuator for the clutch underneath the cover, that shows as a leak that has to be overhauled. Mine leaked like a big dog. In fact one day I went out and there was zero resistance on the clutch handle at all....means no fluid. We had a lot of folks on the web at that time that have never owned anything mechanical, and they went a little crazy. But the transition from dolls to motorcycles is a steep climb. I just added some fluid and had the overhaul and clutch cover replaced at my next service. Not a big deal. Didn't cost me anything either.
Top of pagePrevious messageNext messageBottom of page Link to this message

Froggy
Posted on Thursday, April 01, 2010 - 07:17 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

You can use ECMspy to confirm what flash you have, but the dealer has to be the one that updates it. It is good to verify that they indeed updated you.

Clutch cover - I would wipe it, and if it drips again bring it in for service.

Personally I would do the 620 service yourself, as its literally an oil + filter change, about $40 in materials plus your time.
Top of pagePrevious messageNext messageBottom of page Link to this message

Vinb
Posted on Thursday, April 01, 2010 - 07:44 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

And check the antifreeze level some of these bikes use some before there first service
Top of pagePrevious messageNext messageBottom of page Link to this message

Rex
Posted on Thursday, April 01, 2010 - 09:58 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Yes, I saw the note to check the anti freeze. I had them check at my 600 mile check up, and yep, low...I don't think do anything for set up at the dealer other than put on the price tags..
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Password:
E-mail:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration