G oog le Buell 1125R Forum | Login/out | Topics | Search | Custodians | Register | Edit Profile


Buell Forum » 1125R Superbike Board » Archives 001 » Archive through April 12, 2010 » Torque Hammer and ECM Fitted « Previous Next »

  Thread Last Poster Posts Pages Last Post
Archive through April 08, 2010Easyrider30 04-08-10  12:27 pm
         

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Trafford
Posted on Thursday, April 08, 2010 - 03:46 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Before it was very thirsty......but it only had 1000 miles on it.its improving with use.
I would like a slower idle and 1125R speedo calculations. But the ECM is generally great. Not much use of fans for example is nice. I have a std ecm to test and an EBR Race Pump petrol one to test too. The EBR race ecm has a nice idle but the fans stay on for a long time which drains the battery
Top of pagePrevious messageNext messageBottom of page Link to this message

Trafford
Posted on Thursday, April 08, 2010 - 03:51 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

TPS reset I do every day but not every start. There must be a reason you say every time Easyrider!! What have you adjusted in the ECM that you don't want to make known?

(Message edited by trafford on April 08, 2010)
Top of pagePrevious messageNext messageBottom of page Link to this message

Easyrider
Posted on Thursday, April 08, 2010 - 04:02 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Trafford,

when you measure the tps signal, you notice it change every turn of THE ignition, when doining this every time, you are 100% sure your bike runs every time the Same.

When you dont do it it changes An can cause uncomfortable driving, nothing more nothing less
Top of pagePrevious messageNext messageBottom of page Link to this message

Trafford
Posted on Thursday, April 08, 2010 - 04:08 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Thanks for the info easyrider. When will you get time to sort out the idle speed and speedo adjustment?
Top of pagePrevious messageNext messageBottom of page Link to this message

Easyrider
Posted on Thursday, April 08, 2010 - 04:23 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Working on it, speedo first, idle not sure off, oil pump, charging issues needs to be clear first.
Top of pagePrevious messageNext messageBottom of page Link to this message

Trafford
Posted on Thursday, April 08, 2010 - 04:29 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I have a battery monitor on my bike and the charging is perfect at all revs inc idle -08 1125R. And I run a heated jacket, a navigator, and heated grips.
What issues are there with the oil pump?

(Message edited by trafford on April 08, 2010)
Top of pagePrevious messageNext messageBottom of page Link to this message

Easyrider
Posted on Friday, April 09, 2010 - 01:44 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Traffordre, There is a relation between the amount of oil the engine needs (pupms around) and the RPM idle.

We are trying to find out what the effect of low RPM is and the effect on the oil pump capacity.

When we measured this and it is oke, we now 100% sure we can lower the RPM.
Top of pagePrevious messageNext messageBottom of page Link to this message

Trafford
Posted on Friday, April 09, 2010 - 02:05 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Its not a problem that I can see as the Engine has a recommended idle of 1250 (in the workshop manual/handbook........this was the warm idle on my bike before I fitted your ECM and the EBR Ecm is set at 1200 on request so Buell must be saying its ok too also with fully synthetic oil the engine should be able to survive some minutes at idle without any oil at all.......don't ask me to test this!! The oil manufacturers do these tests.

(Message edited by Trafford on April 09, 2010)
Top of pagePrevious messageNext messageBottom of page Link to this message

Easyrider
Posted on Friday, April 09, 2010 - 02:52 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Trafford, we are a little stubborn, we always measure our self and never believe what somebody else is saying (-:
Top of pagePrevious messageNext messageBottom of page Link to this message

Trafford
Posted on Friday, April 09, 2010 - 06:47 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Fair enough
Top of pagePrevious messageNext messageBottom of page Link to this message

19991200
Posted on Saturday, April 10, 2010 - 12:06 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Have just returned from a 240 mile round trip mainly motorway work at 5000rpm, and surprised at how good the mpg is: 47mpg!

speedo
Top of pagePrevious messageNext messageBottom of page Link to this message

Trafford
Posted on Saturday, April 10, 2010 - 12:57 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

US gallons or Imperial? Also I never trust the IC I always take the mileage and gallons and do the math.
Top of pagePrevious messageNext messageBottom of page Link to this message

19991200
Posted on Saturday, April 10, 2010 - 01:21 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Thats imperial - I live in Manchester , UK. Have just done the maths based on the trip there and this comes out the same as the IC.
Sure it will drop after the bike is used for drag racing!
Top of pagePrevious messageNext messageBottom of page Link to this message

Trafford
Posted on Saturday, April 10, 2010 - 01:24 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

good mileage.......
Top of pagePrevious messageNext messageBottom of page Link to this message

Easyrider
Posted on Saturday, April 17, 2010 - 01:47 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Trafford, how's the bike running now.
Top of pagePrevious messageNext messageBottom of page Link to this message

19991200
Posted on Monday, April 19, 2010 - 02:11 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

On Sunday, i did a 150 mile round trip to take part in a round of the 'straightliners' drag race series at Elvington, near York (UK).
I did three consistent runs, the best of which was 11.08 seconds at 126mph. 60 foot time was 1.8 seconds.
I had problems keeping the front wheel down in second and third gears.
And the clutch was used for each change.
It's a long way off Littlebutquick's times but was good enough to beat a nearly new Honda Fireblade.
In all it was a good day, just need more practice. And for information the bike returned 44mpg overall.
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Password:
E-mail:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration