| Author | Message | ||
     Cherry_bomb |
has anybody here infos about this: firmware version: BUEWD0J8 calibration version: 178:RACE funny, this is installed on my 08 1125r... | ||
| Easyrider |
That is one of the first calibrations.. | ||
| Cherry_bomb |
would you recommend me to update the firmware or was this any good? why is there "race"? | ||
| Ponti1 |
I think "RACE" usually means the map has been modified. From what I have heard, it doesn't match "expected" configuration for some reason, to it gets tagged as a race map. | ||
| Gemini |
don't get your hopes up, it's not a race map and doesn't mean the epprom has been modified. the only ecm layouts used that bit of data that the ecmspy program reads for the configuration layout, meaning us, european, race, etc. with the newer layouts, that byte of info is in a different location. the "old" lacation in your new ecm is simply a value abour 100. | ||
| Froggy |
ECMspy picks up all the 1125R calibrations as race. | ||
| Cherry_bomb |
thanks a lot for your info. i'll get the new firmware soon. | ||
| Xoptimizedrsx |
I have it here I can look into it tonight. I don't have the direct files for it at this time. I have seen it a few times but Its not That common anymore. I believe it was Not first flash but close to it. Not 100% which but it is a early version flash. I can crack it but all you need is a easy fix. A re-flash from the dealer to the BUE2D##### and your good to go from there. Use Tunerpro and ecmread to rework it After that point 100% free. Http://www.ecmspy.com (Message edited by Xoptimizedrsx on March 28, 2010) | ||
| D_adams |
What's this mean when you get a fuel map that displays like this?  | ||
| Cherry_bomb |
haha, got the same out from tunerpro. there is no layout (or i did not found the right one). very strange stuff... | ||
| Gemini |
yeah, wrong layout | ||
| D_adams |
I got it sorted out last night, forgot to post. Look at the date from what you pull off your ecm. Mine's 9-30-09 so I needed the BUE2D, I had the BU0Z0 or something like it. The map looks right now. Just a FYI, to lower the idle, it's in the last section, idle air control map. Shows the idle on mine is supposed to be 1700 rpm I think for cold, 1450 for warm. It had mapping down to 1200 rpm as I recall. | ||
| Xoptimizedrsx |
Glad you got it. Did you get the latest post on getting the data from the ecmread and back to it without converting to a bin file? If not I can re-post if it got buried already. did you download the bue2d within the last couple days? If not you will want to get the latest version . It doesnt matter if you get it from my site or from ecmspy. mine is linked to theirs for instant updates as soon as Gunter makes changes to files. Thanks for the hard work gemini on the skunk works!! 2 thumbs Up. I have the (public) comparison cheat sheet ready for tunerpro in excel. | ||
| Xoptimizedrsx |
the buewd xdf file is in the ecmspy (XDF ) files. I saw it the other day when Updating my files. They also put in the bue3d ecm files. Mike |
