| Author | Message | ||
     Rkammerer |
I recently swapped the huge stock license plate holder out for a much prettier one from American Sport Bike. When getting the grommets out of the stock assembly I managed to have one pop out and roll into one of the dark corners of my garage, never to be seen again. Could someone share the Part Number for the rear turn signal wire grommet? Many thanks! | ||
| Poppinsexz |
I believe its just a piece of 3/8 id fuel hose. You can get it at your local auto parts store | ||
| Lastonetherebuys |
a piece of fuel hose would work but the proper part is a double flared rubber grommet sorry dont have the part number | ||
| Jeepinbueller |
I'm not sure it's going to have a p/n if it's part of the stock fender's parent assembly. It may not break down to that small of a component. I have the parts catalog at home ... I'm going for a ride now, but if nobody's answered with a p/n when I get home I'll attempt to look it up. I think your best bet is to measure the hole in the American Sport Bike fender, and measure the gauge of the signal wire and go to a hardware/automotive store and find a grommet that'll fit. It's not like Buell made the grommet ... they probably outsourced from McMaster-Carr or the like. Should be a pretty standard part. | ||
| Crswede |
M0649.01A3 |
