G oog le Buell 1125R Forum | Login/out | Topics | Search | Custodians | Register | Edit Profile


Buell Forum » 1125R Superbike Board » Archive through March 01, 2010 » Topping oil off « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Redbuell1203
Posted on Thursday, February 25, 2010 - 08:51 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Okay what weight of oil comes in the 1125r from the factory and is it possible to use non-harley brand to top off my oil. I did the oil check and the level isn't even showing on the stick at all. I checked it 3 different times. Just don't want to ruin my bike. So I want to top it off with some oil as to not damage it. My reason for asking is I am 100 miles (one way) from a dealership. Thank you for any help. Oh I have 61 miles on the bike so not quite ready for an oil change.
Top of pagePrevious messageNext messageBottom of page Link to this message

Aplejuce
Posted on Thursday, February 25, 2010 - 09:03 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

you aren't going to ruin your bike. oil is oil. Dont get the cheap stuff... but you dont need gold. Its a rotax engine.. so harley brand isn't going to make it run any better or worse. I've used Valvoline motorcycle 10w30 in every motorcycle ive ever had.. including this one.

also DONT fill it too full.. I would fill it up to 1/2 way on the dipstick all the time, and if would spill out the top of the engine... making a huuuge mess. i thought my motor was bad.


only my 2cents
Top of pagePrevious messageNext messageBottom of page Link to this message

Samg
Posted on Thursday, February 25, 2010 - 09:11 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Hey Aplejuce... Do you use 10w-30 or 10w40 oil? and if u use 10w-30 oil, any clutch slipping issues?
Top of pagePrevious messageNext messageBottom of page Link to this message

Dannybuell
Posted on Thursday, February 25, 2010 - 09:33 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

are you doing cold oil or hot oil check?

Check out the main page above the thread listing.

links to buells owners manuals are right there.

https://www.buell.com/om/99480-09Y_en/file-6.asp#hdtopic006397


dannybuell

(Message edited by dannybuell on February 25, 2010)
Top of pagePrevious messageNext messageBottom of page Link to this message

Redbuell1203
Posted on Thursday, February 25, 2010 - 09:50 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Have done both checks hot and cold. So does anyone know if I use the 10w-40 oil and the factory uses 20w-50 it shouldn't cause any harm anything right?
Top of pagePrevious messageNext messageBottom of page Link to this message

Cheddarheads4erik
Posted on Thursday, February 25, 2010 - 10:46 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Do you have the Owner's Manual?

How are you checking the oil, exactly?
Top of pagePrevious messageNext messageBottom of page Link to this message

Crazyhawk99
Posted on Friday, February 26, 2010 - 02:57 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Redbuell,
You aren't likely to harm the engine by mixing grades, but if at all possible, I would try and top off with the same grade. I was told by my dealer that they come with 20W50 when delivered.
Top of pagePrevious messageNext messageBottom of page Link to this message

Moosestang
Posted on Friday, February 26, 2010 - 04:12 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

10w30? How many miles do you get out of a motor?

I've found that keeping the bike upright is the only way to get consistent results. I let it idle for 3 minutes and shut it off, then check. The bike remains upright the whole time. You can place a 2x4 under the kickstand if you don't have a rear stand.
Top of pagePrevious messageNext messageBottom of page Link to this message

Redbuell1203
Posted on Friday, February 26, 2010 - 07:16 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

sorry for the confusion when saying 10w-30 that was just the first number that stuck in my typing fingers, More then likely I will be using 10w-40 because of the climate I am in. And to answer your question about how many miles, I really hope to see from one coast to the other.
Top of pagePrevious messageNext messageBottom of page Link to this message

Mountainstorm
Posted on Friday, February 26, 2010 - 10:02 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Be careful about over filling.

It's the one procedure that is all Buell.

Moosestang nailed it. You have to have the bike running for 3 minutes perfectly level and upright and I find I need to let it drain for another 3 minutes to get a good reading. Not letting it idle upright long enough or drain long enough will give you a WTF reading and then you'll likely over fill the bike.

Mine uses absolutely no oil that I can detect. It has about the same level from the time I fill to the time I need to change it. Then again I rarely rev the engine over 7K RPM.

I hear that high revs will blow some oil out the breather into the airbox.

So check again and then use a good grade of 20-50 and when you finish the break in and change the oil go with 20-50 synthetic.
Top of pagePrevious messageNext messageBottom of page Link to this message

Redbuell1203
Posted on Friday, February 26, 2010 - 01:10 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I agree with using the 20w-50 oil. Will do another check today since it is sunny and will be above freezing (for a short time) today. So thanks again and will post findings then.
Top of pagePrevious messageNext messageBottom of page Link to this message

Avalaugh
Posted on Friday, February 26, 2010 - 01:32 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Silkolene 20w 50 fully syn, its made my box smoother and i have always used silkolene with confidence.

But i too have problems checking the bloody oil levels, its so hit and miss, but dont leave it more than 4-5k between changes so i know how much i put in, always roughly the same back out : )
Top of pagePrevious messageNext messageBottom of page Link to this message

Aplejuce
Posted on Friday, February 26, 2010 - 07:02 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

ive always used 10w30 in my jap bikes..

but if owners manual says thicker, i will put 20w50 in
i like this all-american bike too much!!

i usually check the oil when i get to a gas station, I just stay sitting on the bike.. so i dont need to prop it up or anything. Has never used any oil, but i still check
Top of pagePrevious messageNext messageBottom of page Link to this message

Redbuell1203
Posted on Friday, February 26, 2010 - 07:12 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Okay went for 30 mile ride this evening yep cooooold after getting back in the garage I checked the oil and still after about 5 minutes pulled the dipstick and nada will put in 3oz tomorrow of 20w-50 and go from there.
Top of pagePrevious messageNext messageBottom of page Link to this message

Skntpig
Posted on Saturday, February 27, 2010 - 03:51 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Did you check it when the bike was on the kickstand or straight up after idling for 3 minutes then waiting 3 minutes straight up?
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Password:
E-mail:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration