G oog le Buell 1125R Forum | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Mrrickbo Posted on Thursday, February 18, 2010 - 02:36 pm:        Does anyone know if the belly pan from Buell will fit up to the fairings that they had offered? And if anyone has had the plastic to warp a bit from the pipe and had it cover under warranty work cause of it. I know that there is a service bulletin out for it now. Just don't know if they are going to warranty/fix it.   Peter Posted on Thursday, February 18, 2010 - 02:45 pm:        Got a copy (or number) of the service bulletin?   Xnoahx Posted on Thursday, February 18, 2010 - 02:47 pm:        The sides and bellypan do not work together   Mrrickbo Posted on Thursday, February 18, 2010 - 02:52 pm:        tt419 you know something?   Justa4banger Posted on Thursday, February 18, 2010 - 03:10 pm:        Warranty will not cover the fairings from melting... its in that tech tip they released back in october or so. As for the belly pan, You might be able to "make " it work, but its definitely not plug N play   Babyhuey Posted on Thursday, February 18, 2010 - 04:50 pm:        warranty will cover that somewhat triangular plastic panel on the rightside of the bike if it melts or is damaged from the exhaust. i worked for a dealer and warrantied several.   Jules Posted on Thursday, February 18, 2010 - 05:09 pm:        The warranty might cover it if they were dealer fitted when the bike was bought - as mine were. The paperwork I received said the warranty covered the bike plus all dealer fitted accessories.. But I'm in the UK so it may be different here.. The service bulletin was only the one to bend the bottom R/H brackets (wasn't it) I had to do mine as it was still touching the pipe so I added a smal plastic spacer too.. Seems fine now..   Mrrickbo Posted on Friday, February 19, 2010 - 01:18 pm:        Thank to all, I'll have to check my paper work. The dealer installed them while it was in the show room. I told them about it several times, but they never did anything to really fix it. I put some 1/4" nylon spacers off the motor side of the brackets and a longer bolt on the front one. That made it perfect! Thanks again, Kevin

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: