G oog le Buell 1125R Forum | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Aj2010 Posted on Saturday, February 13, 2010 - 08:56 pm:        Still collecting parts for a project bike. Does anyone know if the XB and the 1125 use the same bearings at the swing arm pivot? (XB=#6204) id=30mm, width measured at bearings is 135mm. Trying to find out if the 1125 pivot shaft/bolt (a bit stronger looking part) will fit the XB arm (before E-Baying it only to find out it won't) Anyone who has an 1125 arm or pivot shaft off the bike, a few measurements would be appreciated. Thanks   Froggy Posted on Saturday, February 13, 2010 - 09:57 pm:        Bearings are the same. The 1125 shaft has a different part number, but I honestly couldn't tell you what is the difference. Also, the spacer is off the Uly.   Aj2010 Posted on Saturday, February 13, 2010 - 10:47 pm:        Thanks Froggy, if the 1125's use the Uly spacer then the distance between the bearings must be the same for all aluminum framed Buells ..... Guess I'll place my bid

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: