| Author | Message | ||
     Joshinga |
Who made the fender eliminator out of the oem parts. the link would be great I cant seem to find it. | ||
| Endoman33 |
I did one  not the best pic but I could walk you through how I did it just pm me | ||
| Paulp1125cr |
 | ||
| Paulp1125cr |
i machined this one from a couple pieces of aluminum on a five axis cnc mill. it took me longer to surface and program it than it took to cut it. it definatly would have been cheaper to buy one but what fun would that be. | ||
| Sportbikermed |
Looks god Paulp1125CR. What are the 3 circles on the side of the undertail? | ||
| Paulp1125cr |
those are my signals i mounted there and machined some lenses out of lexan so they would sit flush with panel.nice and clean although i was worried about drilling into the plastics but i was happy with the results | ||
| Sportbikermed |
I like that. Unique idea and it turned out great. I went with the integrated LED taillight but had I seen that before I may have went that route. Nice work. | ||
| Tbolt98 |
e's is my effort..  | ||
| Paulp1125cr |
i made signals out of an old school bullet signals and now my signals are flashing faster, i'm assuming it has to do with the bulb replacing the led can anyone help. |
