| Author | Message | ||
     Poppinsexz |
I yelled as loud as I could. I'm installing the cali evap can. Where does the hose connect into the throttle bodies at? I've got the rest, but that connection is not obvious the SM has nothing and I don't have a parts book yet. | ||
| Aeholton |
Left side of throttle body. Brass fitting behind and below throttle cable bracket. | ||
| Aeholton |
It points down, use the hose with the right angle near the end. | ||
| Poppinsexz |
Thank you, I thought that had to be it. It is a pain. I've already taken the bracket loose, I have every tool known to man- except the one I need. A set of needle nose with a 90 at the bottom to pull up on the hose. guess i'm going shopping tomorrow | ||
| Aeholton |
I used a pair of spark plug wire pliers like these:  | ||
| Poppinsexz |
Good idea I'll probably get something in the morning | ||
| Fresnobuell |
Harbor Freight is your friend! And yes, it appears to be a real PITA. I just took a look tonight for the first time. | ||
| Mountainstorm |
What is the part number for the cannister/tubing kit? | ||
| Aeholton |
27042-84A Carbon Canister <> Retail = $37.50 P0066.1AM Hose, TB to Can <> Retail = $9.75 P0067.1AM Hose, Fuel Vent (CALIF) <> Retail = $13.25 | ||
| Poppinsexz |
27042-84A - CANISTER P0066.1AM - HOSE (throttle body to carbon canister) P0067.1AM - HOSE (fuel vent) This is what I ordered. | ||
| Poppinsexz |
Beat to the punch |
