| Author |
Message |
    
Hogzilla
| | Posted on Tuesday, January 05, 2010 - 11:18 am: | 
|
Good to know. I'll check their site. |
Jng1226
| | Posted on Tuesday, January 05, 2010 - 01:26 pm: |
|
Excellent information in this thread, thanks to all for sharing!
Neil - Looking at the Kisan site, and looking up XB12R since they don't have 1125R, it shows the built-in circuit base plug-in module as 30W-D. Do you think this is correct?
Zac4mac - what HID system did you go with that you describe? I do like how sharp the focus is withe the stock headlights and if you're getting a similar pattern that is what I would want.
Thanks in advance.
Jeff |
Hogzilla
| | Posted on Tuesday, January 05, 2010 - 02:10 pm: |
|
Jeff, I just contacted Kisan to confirm the 100HD working with the 1125r LED and it does. I am 99.9% sure this would work for you as well. It also gives you the option to upgrade/change to the LED system from your filament tail lamp.
Here is what they wrote to me. I also asked if I could turn my turn signals into brake lights. The part number for that is below. If you chose to do that, you won't need the 100HD as it does the brake flash as well. However, not as good as the 100HD I believe.
100HD will work the best for the brake flash. It has high speed switching circuit to work with the LEDs.
https://www.kisantech.com/view_product.php?product =100HD
For the turn signals to work as running lights and flash as brakes as well, you use our signalMinder SM-1 for your 1125R Buell.
https://www.kisantech.com/view_product.php?product =SM-1 |
Hdwrenchtx
| | Posted on Tuesday, January 05, 2010 - 02:37 pm: |
|
that signal minder is cool. gives you 4 running lights, hazard light function, and turn signal canceller
if i am reading the info on that link right |
Hogzilla
| | Posted on Tuesday, January 05, 2010 - 03:43 pm: |
|
That sounds right. Has a lot of cool features. I will take a look at the wiring and see how cleanly it can be installed. |
Jng1226
| | Posted on Tuesday, January 05, 2010 - 04:42 pm: |
|
Thanks Hogzilla. I don't like splicing wires as I'm inept but I see that is how you use it with LED brake light upgrades, which is something I was planning on in the future.
Great thread. I wish there was a way to sticky things like this. There are bunch of good threads that can only be found by searching and then bookmarking.
Jeff |
Froggy
| | Posted on Tuesday, January 05, 2010 - 05:00 pm: |
|
The "sticky" posts are at the bottom for now. |
Hdwrenchtx
| | Posted on Friday, January 22, 2010 - 10:26 pm: |
|
has anyone installed one of those signalminders? I ordered one and cant get it to do a damn thing |
Hogzilla
| | Posted on Monday, February 08, 2010 - 04:33 pm: |
|
HD, I just noticed this post. Did you ever get it to work? I am thinking of getting one and not sure now. |
|
