| Author |
Message |
    
Rah7777777
| | Posted on Thursday, December 10, 2009 - 05:59 pm: | 
|
Watch what brand you buy.
I put on a set I bought cheap off the classifieds and they SUCK!!!!!!!!!!
accidentally had them on high on a 80 degree day ride and didnt even notice they were on for about an hour!
Bought a good set and im good into the 30's |
Xnoahx
| | Posted on Saturday, December 12, 2009 - 12:38 pm: |
|
The Symtec ones Im looking at have had god results from lots of people. I was also messing with my traction grips yesterday and they look like they wont be too had to remove from the tube. Get a little compressed air under them and they will slide right off I think. |
Zac4mac
| | Posted on Saturday, December 12, 2009 - 09:55 pm: |
|
I prefer the ones I have... BMC Heated Grips, you know the p/n.
Install was simple, but most important, clean.
I'm good with Farkles, but they can't look ghetto.
Besides, BMC used two elements instead of one with a resistor.
Duplicity in systems is good.
Z |
Avc8130
| | Posted on Sunday, December 13, 2009 - 12:21 am: |
|
Duplicity is good...except when they also add duplicity to the price!
ac |
Xnoahx
| | Posted on Thursday, December 17, 2009 - 01:22 pm: |
|
So I want to wire these into the acc plug. Only problem is I dont know what pins I need for the housing. Since the pins arent on the bike from the factory the parts book doesnt help any. It just lists both housings, the terminal socket connections and the black rubber plugs. Anyone know the part number? |
Ccryder
| | Posted on Thursday, December 17, 2009 - 01:26 pm: |
|
Look here:
http://www.badweatherbikers.com/buell/messages/290 431/388582.html |
Xnoahx
| | Posted on Thursday, December 17, 2009 - 01:34 pm: |
|
Thanks cc. Looks like that thread also had the HD numbers for the parts I need.
73190-96 (the terminals)
72099-06 (the wire seal) |
