| Author | Message | ||
     Italicus |
Milan (Italy) 06 Nov 2008 http://it.youtube.com/watch?v=96js3fPyaOk&feature= related | ||
| Italicus |
 | ||
| Italicus |
  | ||
| Samcol |
That is an awesome looking paint job. Also the pods look different? | ||
| 01xjbuell |
yup, still want that exhaust... | ||
| Pariah |
Thanks for posting, Italicus. Woah, Craig Jones took quite a spill there... makes me wonder if there's something inherently evil about the 1125R/CR... | ||
| Slypiranna |
Best sounding pipe thus far IMO...like to see the dyno sheet tho!  Did you see the end of the video? Waddaway to let a CR get away from ya?! After I saw he was ok, I laughed my a$$ off! Showin' off can get the best of you sometimes. Cool video, thanks for sharing. | ||
| Gschuette |
To me that is the best looking pipe so far. Sounds pretty cool too. | ||
| Dtx |
Where can you buy that exhaust?? | ||
| Slypiranna |
Did anyone pick up on where the cylinder merge point was? | ||
| 01xjbuell |
yeah, way under the bike... lengthening the headers, hmmm looks like they may bulge slightly from the stock-->termi mating point also. maybe to ramp up exhaust speeds into the new length/merge? | ||
| Racerxusa |
Hi Guys: I contacted Italy and distributor LP and they told me December 08! I am interested also as I am purchasing a 09 black 1125CR for riding and maybe club racing. I work as Buell specialist at Skip Fordyce HD/Buell in Riverside, CA. See att: below. R: direttamente dal sitož From: Termignoni Srl (info@termignoni.it) You may not know this sender.Mark as safe|Mark as unsafe Sent: Wed 11/19/08 7:32 AM To: supermotomx@hotmail.com Cc: 'Mario Samala' (msamala@lockhartphillipsusa.com) Dear Mr. Rob Thank for your contact, our new exhaust system for Buell 1125 shall be commercialised for middle of December for any other info please contact our importer in USA after middle of December : Phillips Motorsport Group 151 Calle Iglesia San Clemente, CA 92672 949/498-9090 ext. 270 949/498-9492 Regards TERMIGNONI s.r.l. Via della Rampina, 16 15077 Predosa (AL) Italy Also anyone interested in pipe, let me know I am and have been sponsored by Lockhart Phillips/70/30 for supermoto and get lots of discounts. I have contacted my rider support contact in regard to this pipe/availabilty/price. Rob Kreiner Buell Specialist Skip Fordyce HD/Buell 951 785-0100 ext. 226 (Message edited by racerxusa on November 19, 2008) (Message edited by racerxusa on November 20, 2008) | ||
| 01xjbuell |
I am interested... Nick | ||
| Chadhargis |
What a shame, trashing a perfectly good bike like that.  | ||
| Marshj |
do ya mean decemember 08 racer? (i did the same thing on a job app yesterday) | ||
| Racerxusa |
Sorry my bad!LOL..yes December 2008 is what Termignoni in Italy said and I will get back to you on Lockhart Phillips availabilty/price soon. Thanks. I just contacted my rider rep at Phillip Motors/LP in California/termignoni distributor and it should get here by end of December but more like January 09. Price has not been set but figure 1000.00 or less depending on full sytem or slip-on Race system. I will find out further if its a slip on or options. I want to know what the specs or dyno figures are. Anyone? or I will find out from Termingoni or anyone running one in Europe(Craig Jones). (Message edited by racerxusa on November 20, 2008) (Message edited by racerxusa on November 20, 2008) | ||
| Buellborn |
Great Sound, Great Look! | ||
| Dtx |
RacerXusa, Keep me in the loop. I am interested. Thanks, Drake | ||
| Anonymous |
What is shown on the bike pictured above is Termi's slip-on system. They also have a full system that actually makes a little more power than the Buell factory pipe. Termi code for it is BU08, and it's available in either stainless or titanium. | ||
| Blake |
Any idea what the price is, for a CMRA racer? Ti and SS? |
