G oog le Buell 1125R Forum | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Adoogie3 Posted on Monday, August 04, 2008 - 10:52 pm:        When changing out the stock muffler for like a d&d will the fuel adapt change? And has anyone installed a aftermarket pipe that can comfirm there computer fuel adapt has done this? It also seems that the D&D gains were better than others?I really like the looks of the d&d.Makes it look more naked.   Rainman1ne Posted on Monday, August 04, 2008 - 11:11 pm:        Dyno chart showed the a/f almost exact over 4K   Blazin_buell Posted on Monday, August 04, 2008 - 11:15 pm:        I just got a D&D on mine this week. I can't vouch for the HP gains as I will be getting it Dyno'ed next month. The look is growing on me and I lucked out and it was the Ti look which goes great with all the silver on the bike. I love the mean as hell sound but be prepared to find out which neighbors really like you or not.   Rainman1ne Posted on Monday, August 04, 2008 - 11:38 pm:        Diggin the silver wheels and airbox cover (Message edited by rainman1ne on August 04, 2008)   Adoogie3 Posted on Tuesday, August 05, 2008 - 02:26 am:        I lookin in this post to see if the fuel adapt has changed on a 1125 with a exhaust change. Mine stock now is 105 rear and 95 on the front. I am located in ohio.Blazin did you put headerwrap on the d&d?   Blazin_buell Posted on Tuesday, August 05, 2008 - 09:19 am:        Yes, I had already wrapped the headers previously to cut down on some of the heat so I just carried it through to the D&D. I haven't messed with checking the front and rear values yet but Rainman might have, check with him. I've got a couple of more things to do before I start checking all the diag. stuff on her. Rainman ,those wheels were swapped from a buddies '03 Lightning.   Bueller_bjorn Posted on Tuesday, August 05, 2008 - 09:39 am:        I got a D&D that im plan on slapping on today. Do you need new gaskets or can you re-use the old ones?   01xjbuell Posted on Tuesday, August 05, 2008 - 10:13 am:        any real life sound of the D&D from a ride or similar? Not from a dyno room that echos? just wondering, looking at exhausts now... -Nick   Smilesracing Posted on Tuesday, August 05, 2008 - 11:46 am:        We put D&D slip ons on our race bikes. Aside from being drag race loud- this pipe will break any and all sound restrictions that any race clubs/public streets would have. The pipe also ran the 1125 very lean below 5000rpm. to the tune of 17:1(fuel/air) or worse. We remedied this with a race ECM. Hp gains were only 1-2hp. Fun pipe for the track but I think its too lean and loud for the street. Waiting for a hi flo air filter of some type. Our 1125s gained 8hp on the dyno without the air filter!!!! PS- DO NOT RUN YOUR BIKES WITHOUT THE AIR FILTER PLEASE...ITS NOT WORTH IT. Unless you enjoy engine rebuilds of course.   Rainman1ne Posted on Tuesday, August 05, 2008 - 12:10 pm:        I had the K&N in mine when the dyno was done, that could have made a diffrence.   Smilesracing Posted on Tuesday, August 05, 2008 - 01:08 pm:        Rainman could you give me the PN for the K&N filter? Their website has no info on air filters for 1125Rs.   Adoogie3 Posted on Tuesday, August 05, 2008 - 01:51 pm:        Ive been looking for the part number also.It really made 8 more hp on the dyno without filter.WOW smilesracing do you have the dyno sheet?   Rainman1ne Posted on Tuesday, August 05, 2008 - 02:03 pm:        PN 33-2370, not made for our bikes but easily modified to do so. will need to trim the sides about 1/8 in. to get it to fit.   Blazin_buell Posted on Wednesday, August 06, 2008 - 09:33 am:        Bb, they're a tight fit ,no gasket needed but I did use a little RTV to help slip it on and seal any possible leaks.   Bueller_bjorn Posted on Wednesday, August 06, 2008 - 11:28 am:        Yeah I found that out last night when i put it on. All i got to say no sewing machine sounds for me! the bike sounds insane and I'll post a little vid of it idling some time. The bike sounds crazy at high rpms and louder then my dads FXRS. but might need to invest in some ear plugs or a more sound proof lid.   Edmbueller Posted on Wednesday, August 06, 2008 - 12:50 pm:        So my question is if its that freakin' loud, why doesn't D & D offer an optional baffle?   Adoogie3 Posted on Wednesday, August 06, 2008 - 02:08 pm:        Does anyone have a air fuel ratio sheet from there dyno run?   Bueller_bjorn Posted on Wednesday, August 06, 2008 - 02:59 pm:        So my question is if its that freakin' loud, why doesn't D & D offer an optional baffle? They do offer a baffle which mine was supposed to come with but didn't. that's ebay for you. but its loud but bearable, i would just be worried to take my bike into NYC or any major city with fear of tickets.   Blazin_buell Posted on Thursday, August 07, 2008 - 12:48 am:        The guy I got mine from (thanks Kevin) had a baffle made that I fiber wrapped and put in. I don't think it's doing much for muffling sound but hopefully there's enough back pressure to help with the lean issue. Is there a pic of D&D's baffle out there ,I'd be curious to see their design.   Bueller_bjorn Posted on Thursday, August 07, 2008 - 02:56 pm:        I'm curious what effect the new 09' map is going to have with my D&D since this pipe was originally designed for stock 08 map. (Message edited by bueller_bjorn on August 07, 2008)   Rainman1ne Posted on Thursday, August 07, 2008 - 07:17 pm:        like riding a horse at the rodeo   Samcol Posted on Sunday, August 10, 2008 - 08:38 pm:        I have the D&D on my xb12s and was curious if the D&D is significantly louder on the 1125r. I'm thinking about getting a 1125, but I heard the stock exhaust and could never live with it so looking at different options.   Bueller_bjorn Posted on Tuesday, August 12, 2008 - 08:00 pm:        Video of my D&D at idle with a little rev http://www.youtube.com/user/bjorn97vr4 Embed is not working because for some dumb reason "H-B-M" which is in my youtube code and link is some dumb command for hillbilly motors no offense to them just dumb web programing and was making me go crazy till i figured it out. anyway i guess i'll have to post it the old fashion way since the link will never work if is has h-b-m in it so go to my channel http://www.youtube.com/user/bjorn97vr4   Xl1200r Posted on Wednesday, August 13, 2008 - 11:03 am:        Bueller - try changing the code so that "H-B-M" is lower case: "hbm". It works - hbm and Hillbilly-Motors   Bueller_bjorn Posted on Wednesday, August 13, 2008 - 11:40 am:        pretty sure i tried that but youtube url is case sensitive, can't double check b/c at work now and youtube is blocked feel free to try it   Xl1200r Posted on Wednesday, August 13, 2008 - 12:49 pm:        ...blocked here too... I didn't think url's were ever case sensitive, but I'm a techno geek, either.   Bueller_bjorn Posted on Wednesday, August 13, 2008 - 06:20 pm:        Yea tried it again no good, its not that URLs are case sensitive but youtube identifier codes at the end of the url are. oh well what are the chances my youtube code is a dumb forum command.   Madxcat Posted on Wednesday, August 13, 2008 - 07:07 pm:        definantly sounds loud.   Dtx Posted on Sunday, August 17, 2008 - 10:27 am:        Finally saw and heard the D&D exhaust yesterday. Wow...that is LOUD! It was on Ill Conduct's (Buell stunt team) 1125R.   Adoogie3 Posted on Sunday, August 17, 2008 - 10:55 pm:        Once again this forum was hacked from the getgo.Nobody can answer my question?----------------------------------------- --------------------------------------- When changing out the stock muffler for like a d&d will the fuel adapt change? And has anyone installed a aftermarket pipe that can comfirm there computer fuel adapt has done this? This is how the forum got started and noone has given any useful info once again.Just a bunch of jumbo talk.