G oog le Buell 1125R Forum | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Donutclub Posted on Friday, August 01, 2008 - 08:19 pm:        Has anyone safety wired their right side drain plug? I'm thinking that it's going to require a new bolt since the OEM bolt is "flat". I wired up the left side and the oil filter bolts, but I'm stumped on the right bolt.   Josh_ Posted on Friday, August 01, 2008 - 09:28 pm:        Nah, grab a 1/16" drill bit and a decent angle and have at it. I wussed out and did it off the bike, but on the bike you'd get the best angle for the wire to go. Don't forget the oil filler (I wrapped the other end around the bolt for the plastic heat sheild). I pick up my Buell Racing belly pan tomorrow, but just found out it doesn't include hardware!   Donutclub Posted on Saturday, August 02, 2008 - 09:19 pm:        I drilled it off the bike. It wasn't pretty, but I got it done. Thanks for the confidence!

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: