| Author | Message | ||
     34nineteen |
I am cutting up some junk wire harnesses off of a Ulysses and Firebolt. Anyone wanna buy an electrical connector? Ecm connectors (ddfi2), fuse boxes, fuel injectors, service port, instrument cluster, etc. Shipping is going to be $8 via USPS Priority and I will combine shipping. None of these are new. They are all USED off wrecked or salvage bikes. Let me know what you’re looking for and I’ll see what I’ve got. | ||
| Rono |
How about the one joining the stator to the voltage regulator? Male and female ends preferably. | ||
| 34nineteen |
One side is with the stator, the other is with the rectifier/regulator. These parts are actually separate from the wire harness. You could theoretically use any quality 3 wire Delphi/Weatherpack connector if you need both ends. It’s just the AC side so wire colors and configuration really don’t matter. Unless you’re looking for this.  | ||
| Ironhead1977 |
I need a temp sensor from the rear head. | ||
| 34nineteen |
When you buy that P1278.K sensor, it comes with both sides of the plug. One side is already installed on the sensor, the other is a kit to install on the harness wire to convert the bullet connector to the correct plug. https://cdn.shopify.com/s/files/1/1713/7809/files/ P1278.K.pdf?12395726232429412865 You can also theoretically just cut off the fancy connector and go back to the old style bullet connector. The new connector is just more weather resistant. Unless you are looking for the sensor, to which this ad is not to sell sensors, ECM's or other components that plug into the harness. Its just the wire harness that I cut the plugs off of. (Message edited by 34nineteen on January 03, 2022) |
