| Author | Message | ||
     Bernhardgrave |
For any of you thinking of building a BOTTpower XR1, I have the follow parts to sell, as a set, that I believe will save you quite a bit of money. David Sanchez allows you to buy all the other parts individually to finish it off. When I built my BOTT, I decided to go a different route and feed her with an S1 Keihin CV carburetor, and with the Altmann ignition it runs SOOO well that I know that I will never want these parts, so I have decided to pass them on to some other enthusiast who want to build one and save some $$$ LEFT SIDE AUX ALUMINUM TANK -with fuel pump installed. Never used nor dry fitted. RIGHT SIDE ALUMINUM TANK -Never used nor dry fitted. FIBERGLASS XR1 TANK - unpainted, it has had fuel in it, since I was in a hurry to get the carburetor dialed in before the larger tank was completed. ALL ASSOCIATED HOSES AND FITTINGS- for hooking up and mounting all three tanks with fuel injection. Except for one of the quick release right-angle disconnects, these parts were never used or dry-fitted either.     | ||
| Luvfastbikes |
PM sent |
