G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Buell Forum » Buell Motorcycle Classifieds » Buell Parts & Accessories for Sale » Air Cleaner Assembly 2009 Buell XB 12 Scg + other possible parts in bundle « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Tpehak
Posted on Sunday, June 07, 2020 - 09:06 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Please note, the Airbox is sold and I do not ship another items separately. Another items I posted here was only to encourage you to buy the Airbox buying few parts in bundle. If you are OK to pick up the items locally here in West Seattle it will cost you 30% more than I posted here.

Alright, I finally sorted a bunch of parts and offer 2009 Buell XB 12 Scg Airbox Air Cleaner Assembly with another possible parts in bundle.

As some of you know I customised my Buell (see the picture in my profile) and have a bunch of leftover parts after this project I want to get rid of.

I want to sell the 2009 Buell XB 12 Scg Air Cleaner Assembly.

Here is a list of additional parts I can put in the box with the air cleaner if they can fit inside. Details about the parts, price, available quantity, condition and ppictures you can find further.

- Airbox SOLD
- Airbox baseplate screws
- Airbox cover SOLD
- Battery Strap
- Belt Drive SOLD
- Belt Guard Fasteners
- Belt Stone Guard
- Belt Tensioner
- Center Tail Section Fasteners
- Clutch Cable
- Clutch Cable Guide
- Clutch Switch
- Decal flyscreen
- Flasher Relay
- Flyscreen bolts and washers
- Flyscreen Lowered
- Flyscreen Translucent Blue
- Free Spirits Chain Conversion Guard
- Free Spirits Front Indicator Brackets
- Free Spirits Front Sprocket
- Front Brake Line
- Front Module Left
- Front Module Right
- Front Pulley
- Front Pulley Fasteners
- Front Sprocket with offset
- Front Turn Signals
- Fuel Rail
- Fuse Block Cover
- Fuse-Relay block assembly
- Handlebar
- Handlebar End Plugs
- Headlight assembly
- Headlight Hardware
- Headlight mount bracket
- Headlight Parts
- Headlight wires guide
- Injectors
- Instrument Cluster
- Instrument Cluster Mount Fasteners
- Keyed set
- LED Chopped Tail
- Left hand Control
- License Plate Light
- Lower Belt Guard
- Mirrors
- Motogadget M-Lock
- Motogadget MSM Harley Davidson Handlebar Clamp
- Passenger foot pegs with hardware
- Passenger Footpegs Brackets Assembly
- Read Brake Reservoir Fasteners
- Rear Brake Pedal SOLD
- Rear Sprocket
- Rear Sprocket with Offset
- Rear turn signals
- Rear Wheel Spacer
- Relays and Fuses misc
- Rider Foorpeg Bracket Fasteners
- Right Side Airscoop
- Seat Rails to Frame Fasteners
- Shift Pedal SOLD
- Steering Damper Clamp
- Subframe Rails
- Tail Rear Reflector
- Tail Screen
- Tail Side Reflectors
- Tail trunk
- Throttle Cables
- Truss Torx Screws 1/4-20 X 1/2
- Upper Belt Guard
- Wiring Harness
- Wiring Harness Case


The Air Cleaner Assembly includes Air Cleaner Baseplate (P/N P1700.1AK), Air Cleaner Cover (P/N P0215.3AA), Temperature Sensor Grommet (P/N P0139.K), Baseplate Bumpers Set (P/N C0095.4A8) Baseplate to Cover foam seal (P/N P0144.02A8).

The Air Cleaner Assembly is from my 2009 Buell XB 12 Scg, it has about 25000 miles and it is in good condition.

The parts are wrapped with foam and packed in double wall cardboard box (see the pictures).

I bought second Air Cleaner Assembly to modify it and kept the original Air Cleaner Assembly in the motorcycle so I could ride it during building parts for the project. Now I installed the modified airbox cleaner and I have these parts I don't need anymore.

My living room has a bunch of Buell parts I do not need anymore. Since I'm too lazy to spend my time to clean the room you are welcome to pickup the Air Cleaner Assembly or another Buell XB parts I have locally here in West Seattle.


The Airbox Cleaner Assembly is $30+shipping cost. I believe this is nice price for Badweatherbikers board members.

Only USA shipping. I'm going to use USPS service to send the package with parts. Also please note that I will be available to ship the parts likely only on Saturday.

The parts are available for local pickup here in West Seattle.

Package box size is 20.5" X 17.5" X 11". Weight is 6.3 lb. My zip code is 98106. So you can estimate how much shipping service will cost for you.

I accept PayPall payment.




















I also have 2009 Buell XB12Scg Airbox Cover translucent blue. The airbox has cracked rear mounting holes, has scratched, has delaminated central sticker (see pictures), so it is in really bad condition but if you want to use it somehow I can include this in the package for free. The airbox cover goes with front fasteners inserts (aluminum bushings and rubber washers). This is original airbox cover from my motorcycle with 25000 miles. I replaced it with carbon fiber cover and I don't need it anymore. I do not ship the airbox cover separately. If you need only the airbox cower you are welcome to pick it up personally in West Seattle for $10.

The airbox cover will add 3 lb of weight so add it to shipping calculation.






















I can also include the parts below in the Airbox Assembly shipping box if they will fit. The showed prices of the parts are only if you want to buy them in bundle with the Airbox Assembly. I do not ship them separately. But if you want to pick up them locally here in West Seattle I can sell them by 30% increased price. My current goal now is to sell the Airbox Assembly, I do not have time to manage the small items.

Please note the parts weights I posted is just rough estimation, I do not have scale near by to check the weight exactly.

The parts price I posted for sale is about 50% or even less you can find in the interner, so you might save on shipping the big box with the air cleaner if will add another parts in the bundle.


2009 Buell XB 12 Scg Black Tail Sections Subframe Left (P/N M0614-1ADYT) and Right (P/N M0612-1ADYT) - add $50 and 3 lb for Left and $50 and 3 lb for Right.

The subframes have attached shoulder screws, 2 on each (P/N CA0018.02A8)

The subframes are overall in good condition, they have some scratched and chipped paint, the Right subframe has chipped paint spot outside (see the pictures), The Left subframe has notched seat hook post (probably done on the factory to fit the seat, see the picture).

The subframe is from my motorcycle with 25000 miles, I designed and built custom subframe with custom seat and I do not need the original seat parts anymore.

















2009 Buell XB 12 Scg Handlebar Black (P/N N0002.1ADYCX) - add $25 and 2 lb)

The handlebar has some scratches, rubbing marks and chipped paint spots.

The handlebar is from my motorcycle with 25000 miles. I installed Firebolt handlebar on my motorcycle so I do not need the original handlebar anymore.








Chopped Tail for LED stripe with license plate bracket I build a few years ago. The tail has chipped paint finish and requires finish reconditioning. The bottom portion of the tail is curved due do welding distortion so it is not perfect fit and I had some issues with latching the seat with this tail. You also need to build you own LED stripe (see the link with detail below), it requires skill and some time. I took original LED stripe for my new custom tail so it goes without LED stripe. Add $40 cost and 1 lb weight.

Here is my build thread link https://www.buellxb.com/forum/showthread.php?49983 -LED-stripe-tail-chop-from-stock-tail










2009 Buell XB 12 Scg Trunk Pan (P/N M0007.1AD)with Battery Pan (P/N VINL0076.1AD), Seat Latch (P/N M0069.02A8), Seat Latch Bracket (P/N L0075.1AD), Rear Shock Reservoir Mount (P/N L0072.1AD), Seat Lock Cable (P/N M0066.1AD), Retainer Seat Lock (P/N M0067.02A8), Seat Lock Plate (P/N M0068.5AC), ECM mount fasteners and some another fasteners (see the pictures) - all this add $30 and 4 lb weight.

The trunk is from my motorcycle with 25000 miles, I designed and built new tail section and do not need the original parts anymore. The trunk assembly is in good condition, has some rubbing marks inside.












Motogadget M-lock contact free digital ignition lock - add $70 and 0.5 lb.

https://motogadget.com/shop/en/m-lock-rfid-zundsch loss.html

Here is thread with installation https://www.buellxb.com/forum/showthread.php?47699 -LSL-Headlight-Motoscope-Mini-M-Lock

I dethached this M-lock from my mototcycle. It has about 20000 miles. This kit includes Sensor, Master Key, Key Fob, Relay, Fuse, Instruction manual.

The original Key Fob housing is cracked so I built my own new Key Fob with Buell logo engraving.

The sensor wires are trimmed and their current length is about 9 inches.

I installed Buell Firebolt steering head lock so I do not need this M-lock anymore.















Motogadget MSM Harley Davidson Handlebar Clamp (fits 2009 Buell XB12Scg) - add $90 and 2 lb.

https://motogadget.com/shop/en/hd-handlebar-top-cl amp-1-zoll.html

Here is thread with installation https://www.buellxb.com/forum/showthread.php?47699 -LSL-Headlight-Motoscope-Mini-M-Lock

The clamp includes 4 fasteners for handlebar clamping and 2 fasteners for Motogadget Motoscope Mini.

The clamp is in very good condition, has minor dings (see the pictures). The wires of the clamp is trimmed and their current length is about 11 inches.

I used this handlebar clamp with Motogadget Motoscope Mini on my motorcycle, it has about 20000 miles. I recently designed and built my own custom Motosign bracket with LEDs signals for Buell Firebolt handlebar I installed on my motorcycle so I do not need this clamp anymore.














2009 Buell XB 12 Scg Complete Lock Set (P/N Y0602.1AD) - add $50 and 3 lb.

The set inclides 2 keys, steering head lock, seat lock, gas cap, key recovery number.

The key set is from my motorcycle and has 25000 miles. I installed Buell Firebolt keys set on my motorcycle so I do not need this key set anymore.

The key set condition is OK, It has some scratched and bends on sloted metal plates (see the pictures).










2009 Buell XB 12 Scg Passenger Foot Pegs and Hardware (NEW in packages, never used):



Passenger Footpeg Left, NEW, never used (P/N N0552.02A8) - add $15 and 0.5 lb



Passenger Footpeg Right, NEW, never used (P/N N0553.02A8) - add $15 and 0.5 lb



2x Footpeg Pivot Pins, NEW, never used (P/N C0235.02A8) - add $2 and 0.1 lb for each pin.



2x Footpeg or Sidestand E-clips, NEW, never used (P/N N0425.02A8) - add $1 and 0.05 lb each E-clip.



2x Footpeg detent balls, NEW, never used (P/N N0429.02A8) - add $0.7 and 0.05 lb each ball.



2x Passenger Footpeg Detent Plates, NEW, never used (P/N N0427.02A8A) - add $1 and 0.05 lb each plate.



2x Passenger Footpeg Coil Springs, NEW, never used (P/N N0428.02A8) - add $1 and 0.05 lb eash spring.




4x 2009 Buell XB 12 Scg 1/4- 20X11/16 shoulder torx screw, used in airbox baseplate and some another plastic fairings (P/N CA0012.02A8) - add $1 and 0.05 lb each.

The screws are from my motorcyle airbox baseplate and have 25000 miles. Condition is OK, have some wear on the torx interface. I relocated all electrical components to my motorcycle airbox and designed cutom airbox bracket for them and use different longer screws so I do not need these original screws anymore.




2009 Buell XB 12 Scg Battery Strap (P/N Y0103.02A8) with battery Strap Adapter (P/N C0041.02A8) - add $10 and 0.5 lb.

I bought this strap with adapter on Ebay used and add to it 25000 miles. The condition is OK. It has metal adapter, it looks like it bent or something, my motorcyce did not have this adapter so I do not know if it should be like this but it works OK holding the battery. I used this adapter in combination with the strap othervise the strap alone will just be overstretched and broken.

I relocated battery in the airbox and use different mounting method and do not need this strap anymore.








Pair of 55mm Inside Diameter Front indicator light bracket for Harley Davidson & Triumph Free Spirits 209810, NEW, never used - add $50 and 0.5 lb.

https://www.freespiritsparts.com/en/front-indicato r-light-bracket-diam-55-mm764.html

It does not fit 2009 Buell XB 12 Scg because of the inside diemeter of the brackets is 1 mm bigger (it needs to be 54 mm to fit properly) and also has interfence with the frame in most locations. I do not know if it will fit another Buells.

The brackets are new and never used.








2009 Buell XB 12 Scg Headlight and Instrument Cluster parts and fasteners:



2009 Buell XB 12 Scg Windscreen Translucent Blue (P/N M1600.1AJAMBX) - add $10 and 0.5 lb

The windscreen is not in good condition, it has cracks around the mounting holes, has rubbing marks inside, has delaminated foam piece, has scratches.

This flyscreen is from my motooccyle and has about 15000 miles. I installed differend headlight so I do not need this flyscreen anymore.










2009 Buell XB 12 Scg Windscreen White Modified (lowered and covered with blue plastidip) - add $30 and 0.5 lb


I bought this flyscreen new in original white color, lowered it (drilled new holes and glued the original holes with plugs) and covered with blue plastidip. The screen has about 1000 miles and is in good condition. I instanned different headlight and do not need this flyscreen anymore.










2009 Buell XB 12 Scg Flyscreen/Tail Decal (P/N M0726.1AC) - $1 add 0.01 lb.

This decal is from the my original flyscreen. In has no adhesive layer and has some bents. Maybe somebody can use it somehow.






4x Flyscreen Bolts (P/N AN1005.3FSS)with Washers (P/N CB0009.02A8) - add $0.5 and 0.05 lb each bolt+washer.

The bolts condition is OK. The plastic washers are deformed. These fasteners are from my original flyscreen. I use different headlight and do not need them anymore.




2009 Buell XB 12 Scg Instrument Cluster(P/N Y0500.AC) - add $80 and 2 lb.

The cluster has around 4636 miles on odomenter and is in good condition, has some web scratches on the plastic screen (see the pictures).

I removed this instrumet cluster from my motorcycle at 4636 miles. I use different headlight with Motogadget Motoscop Mini instrument cluster so I do not need the original instrument cluster.








2009 Buell XB 12 Scg headlight mount bracket (P/N M0645.1ADA) with Bracket Horn Mount (P/N M0006.1AD) - add $10 and 0.5 lb for the assembly.

The bracket is in good condition, it has some oxidation on the surface. This bracket is from my motorcycle and has about 4600 miles. I installed different headlight and do not need this bracket.








2009 Buell XB 12 Scg Headlight Assembly (P/N Y0721.6AC) - add $60 and 2 lb.

The headlight has trimmed wiring and has no recepticle. One rubber boot has tear on the wiring inlet (see the pictures). Has some scrathchet and watermarks. The rest is good. Has installed light bulbs.

This headlight is from my motorycle and has about 4600 miles. I use different headlight and do not need this headlight anymore.










2009 Buell XB 12 Scg Front Headlight Module Left Black (P/N M0642.1ADYT) - add $80 and 2 lb.

The Module is from my motorcycle and is in good condition. It has about 4600 miles. Has minor scratches. I installed different headlight on my motorcycle and do not need this module.






2009 Buell XB 12 Scg Front Headlight Module Right Black (P/N M0643.1ADYT) - add $80 and 2 lb.

The Module is from my motorcycle and is in good condition. It has about 4600 miles. Has minor scratches. I installed different headlight on my motorcycle and do not need this module.





2009 Buell XB 12 Scg Turn Signals Rear Right (P/N Y0503.02A8A) and Rear Left (P/N Y0504.02A8A) - add $10 and 0.5 lb for the pair.

The signals have no plugs, have trimmed wires, have no sleeves on the wires. The plastic housings have some scratches.

These turn signal are fom my motorcycle and have about 4600 miles. I use side bar turn signals and do not need the original turn signals anymore.













2009 Buell XB 12 Scg Turn Signals Front Long Right (P/N Y0504.KA) and Rear Left (P/N Y0503.KA) - add $8 and 0.5 lb for the pair.

The signals have no plugs, have trimmed wires, have no sleeves on the wires. It looks like the lenses on both turn signals have brocken tabs and as result they form gaps with housing (see the pictures). The plastic housings have some scratches.

These turn signal are fom my motorcycle and have about 4600 miles. I use LED stripe tale turn signals and do not need the original turn signals anymore.
















2009 Buell XB 12 Scg Headlight Assembly Truss Torx Screws 1/4-20 X 1/2(P/N AA0404.11CXZB and VINAA0404.11CXVB) and Washers 1/4 X 3/4 (P/N BA0412.2Z)- add $5 and 0.2 lb for 5 screws and 2 washers.

These fasteners are from Headlight assembly. They have about 4600 mileas and are in good condition. I removed tham from my motorcycle becasue of I instaled different headlight.






2009 Buell XB 12 Scg Instrument Cluster Mount Fasteners, 3x Inrument Cluster Rubber Grommets (P/N M0649.01A3), 2x Nuts M5 X 0.8 with wide base and 1x Nut M5 X 0.8 (P/N D0500.12CCBL), 1x Washer 5mm X 10mm (P/N B0510.1BL), 1x Bolt 5/16-18 x 1 1/2, 1x Spacer 5/8 long for 5/16 bolt - add $5 and 0.2lb.

These fasteners are from my instrument cluster. They have 4600 miles and are in good condition. I do not need them becasue of I installed different headlight.






2009 Buell XB 12 Scg Headlight Hardware, Lower Headlight Mount (P/N M0619.1AD), Truss Torx Screw 1/4-20 X 1/2(P/N AA0404.11CXZB), Bolt 5/16-18 X 7/8, Washer 5/16 X 11/16 - add $3 and 0.2 lb.

The hardware is in good condition. The bracket have some scratches from fasteners. The hardware have about 4600 miles. I removed them from my motorcycle becasue of I instanned different headlight.






2009 Buell XB 12 Scg Headlight Wiring Guide - add $0.5 and 0.05 lb.

I do not remember exactly what is this part from, but it went out of my motorcycle headlight assembly. It looks like wiring guide or maybe cable guide. The condition is good, 4600 miles. I use different headlight and do not need this item.




4x 2009 Buell XB 12 Scg Bolts 5/16-18x1 Subframe Mount, Handlebar Clamp Pinch(P/N AA0508.2CZB) with Washers 5/16 X 1/2 (P/N CB0002.9A7) - $4 and 0.2 lb for the whole set.

I removed these bolts from my motorcyle subframe. They have 25000 miles. Condition is good. I design and build custom subframe for my motocycle and do not need these fasteners.






2009 Buell XB 12 Scg Rear Brake Reservoir fasteners, Screw M6x20, Washer, 6mm X 13mm and Spacer - add $0.5 and 0.1 lb for the set.

I removed these fasteners from my motorcycle rear brake reservoir. Condition is good. 25000 miles. I design and build custom mount for rear brake reservoir and do not need the original fasteners.






2007 Buell XB Clutch Cable Guide (P/N N0012.1AA)with Washer (P/N B0613.1Z) and Screw 1/4-20 x 1/2 Torx Truss head black (P/N AA0404.11CXVB) - add $1 amd 0.2 lb.

The item came from front isolator I bought on Ebay. The mileage is unknown. This is old style clutch cable guide. Condition is OK, the screw and washer have some rust.






4x 2009 Buell XB 12 Scg Center Tail Section Mount Screws 1/4-20x5/8 - add $0.25 for each screw.

These screws are from my motorcycle cental tail section. They have maybe 10000 miles. Condition is good. I designed and built custom tail frame and do not need these screws.






2009 Buell XB 12 Scg Tail Reflectors Brackets Left (P/N M0232.4A8) and Right (P/N M0233.4A8) with Red Reflectors (P/N 59259-90) - add $10 and 0.2 lb for the set.












2009 Buell XB 12 Scg Left and Right Passenger Footpegs bracket with attached footpegs, heel guards and bracket fasteners - add $80 and 4 lb for the set.

The passenger footpegs brackets asembly are from my motorcyle and are in very good condition. They have about 25000 miles. I designed and built custom tail and do not need the passenger footpegs.













(Message edited by TPEHAK on June 08, 2020)

(Message edited by TPEHAK on June 08, 2020)
Top of pagePrevious messageNext messageBottom of page Link to this message

Tpehak
Posted on Sunday, June 07, 2020 - 09:07 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

2009 Buell XB 12 Scg Drive Belt (P/N G0500.1AAG) - add $40 and 1 lb.

This is original drive bent from my motorcycle and it has about 4000 miles/ The belt is in good condition. I designed and installed installed chain conversion on my motorcycle and do not need the belt.










2009 Buell XB 12 Scg Shift Petal (P/N N0601.02A8A), 2x Shift Pedal Bearings (P/N N0513.T), Sleeve Shift Pedal (P/N N0599.02A8A), Shift Linkage Bolt 10-24 x 3/4 (P/N AN1006.2CXZB) - add $15 and 0.2 lb for the set.

The shift pedal is in good condition. The rupper toepeg (P/N N0600.02A8A) is teared and need to be replaced. The shift peg is from my motorcycle and has about 4000 miles. I installed Knight Design shift pedal and do not need the original shift pedal.













2009 Buell XB 12 Scg Rear brake pedal (P/N N0501.02A8), 2x Bearings for Brake Pedal (P/N N0513.T), Sleeve Brake Pedal (P/N N0599.02A8A) - add $10 and 0.2 lb for the set.

The brake pedal is in good condition. The brake pedal is from my motorcycle and has about 4000 miles. I installed Knight Design brake pedal and do not need the original brake pedal.











2x 2009 Buell XB 12 Scg Hnadlebar End Plugs (P/N N0010.02A8) - add $1 for the set.

The plugs condition is OK. They have marks from prying effort. I removed them from my motorcycle, they have about 2000 miles. I installed hadlebar end mounted mirrors and do not need the plugs.










2009 Buell XB 12 Scg Fuel Rail (P/N P0268.5AA) - add $15 and 1 lb.

This fuel rail is from my motorcycle and has about 24000 miles. Condition is good. I bougnt another fuel rail on Ebaiy to modified it and intsalled fuel pressure gauge while kept riding my motorcycle, then I replaced my original fuel rail by modified fuel rail. I do noot need the original fuel rail anymore.












2x 2009 Buell XB 12 Scg Stock Round Mirrors(P/N N0161.01A1A) - add $40 and 1 lb for the pair.

The mirrors are from my motorcycle. They have about 1500 miles. The condition is good, they have some spider web scratches and some chipped paint on the fasteners. I do not need them becasue of I use side bar mounted mirrors.








2009 Buell XB 12 Scg Front Pulley 27T Steel (P/N 40288-95) - add $25 and 3 lb.

The front pulley is from my motorcycle and has about 4000 miles. It is in good conditiom, has some oxidation. I installed chain with sprockets on my motorcycle and do not need the pulley.








2009 Buell XB 12 Scg Belt Tensioner Idler Assembly - add $15 and 3 lb.

This Idler assembly is from my motorcyle. It has about 4000 miles. The condition is very good. I use chain drive conversion and do not need the idler.








2009 Buell XB 12 Scg License Plate Light (P/N Y0514.CA) with light bulb - add $4 and 0.2 lb.

The licence plate light has trimmed wires with no plugs. I removet this unit from my motorcycle. It has maybe 2000 miles. I use custom tail and do not need the original light.










2009 Buell XB 12 Scg Front Pulley Fasteners - add $5 and 0.8 lb for the set.

The front pulley mount fasteners include 2 bolts (condition is new), a nut (condition is new), and lock plate (condition is OK, it has some rust and I modified it grinding the corners a little, but it does not affet the function). The lockplate is original plate from my motorycle and has 25000 miles. The rest is new items I bought on Ebay from Harley Davidson Drag Specialties front sprocket mount kit.






21T front sprocket from Free Spirits Buell XB chain conversion kit - add $20 and 1 lb.

The condition is NEW, never installed. I bought Free Spirits Buel XB chain conversion kit to borrow only rear sprocket and chain tensioner. I do not need the front sprocket.








Free Spirits Chain Conversion Guard for Buell XB? - add $20 and 0.5 lb.

These parts are from Free Spirits chain conversion kit, there a few CNC machined black anodized aluminum brackets, roller and some fasteners. I do not know the purpose of this part, it looks like some kind of chain guard, Free Spirits did not provide instructions with their kit. I bought Free Spirits Buel XB chain conversion kit to borrow only rear sprocket and chain tensioner. I do not need these part.





Buell XB Rear Sprocket Vortex 49 Teeth, for 520 Chain, finish Black anodized(P/N 827A-49) - add $20 and 0.4 lb.

https://www.vortexracing.com/product/827a/?attribu te_pa_teeth=49&attribute_pa_sprocket-type=aluminum -silver

This sprocket fits Buell XB Wheel. It has 49 teeth, fits 520 chain, made of aluminum alloy (I was not able to find info about which aluminum alloy they used for this sprocket), made in the USA. The condition is very good. It hase less than 100 miles. I used it temporary for short period of time before installing bigger steel rear sprocket on my motorcycle.







Buell XB Front Sprocket with Offset for 240 mm rear wheel conversion, 520 chain size, 23 Teeth, Steel - add $40 and 2 lb.

This sprocket has offset to work with 240 mm rear wheel. It has 23 teeeth. Made in the USA. It is modified PBI 288-23T sprocket (the teeth width was grinded down to fit 520 chain). This sprocket has about 20000 miles and is in good condition, it has a little wear. I used this sprocket with my 240 mm rear wheel and then switched for smaller 22 teeth front sprocket to maintain correct chain slack after I replaced the chain (for some reason this sprocket maintained too much stretch with new chain on my 2009 Buell XB 12 Scg so I switched to 22 teeth front sprocket).

If you are planning to use this sprocket for your 240 mm rear wheel conversion you have to make sure it will maintain appropriate slack with particular rear sprocket and idler you are going to use, otherwise it will not work or can damage the motorcyle. Buell XB does not have chain tension mechanism so you have to find correct combination of sizes between front sprocket, rear sprocket and idler to maintain correct chain slack. Read this whole thread carefully for more details https://www.buellxb.com/forum/showthread.php?9823- Tire-240mm











Buell XB Custom Rear Sprocket with Offset for 240 mm rear wheel conversion, 50 Teeth, 520 Chain, Black Hardcoad finish, 7075-T6 aluminum alloy, NEW - add $100 and 2 lb.

This is custom rear wheel sprocket I designed for my Buell XB 240 mm rear wheel conversion. It has 50 Teeth and fit 520 chain. This sprocket built here in the USA by Rebel Gears out of 7075-T6 certified Aero Space grade aluminum alloy http://www.rebelgears.com .

The condion is NEW, never used. I desided to use flat steel sprocket with aluminum spacer isdeat of this custom aluminum sprocket with offset due to steel prockets provides more longetivity and they are cheaper.

If you are planning to use this sprocket for your 240 mm rear wheel conversion you have to make sure it will maintain appropriate slack with particular rear sprocket and idler you are going to use, otherwise it will not work or can damage the motorcyle. Buell XB does not have chain tension mechanism so you have to find correct combination of sizes between front sprocket, rear sprocket and idler to maintain correct chain slack. Read this whole thread carefully for more details https://www.buellxb.com/forum/showthread.php?9823- Tire-240mm

Benefits of this sprocket with offset over flat sprocket with spacer: you do not need addition spacer part, you don't need to use different longer fasteners and you can just use OEM Buell rear pulley bolts with this sprocket, you don't need to modify and grind swingarm near the wheel hub for the proper spacing with sprocket bolts likewise you have to do with flat sprocket with spacer, this sprocket is ligter than srocket with spacer.

This sporket cost me more than $200 besides the time I spent for designing it and for communicating fabricator so you have a chance to buy this sprocket more than 2 times cheaper it would cost you.













Buell XB Rear Wheel 2 Bearings Axle Inner Spacer (P/N G0323.02A8) - add $3 and 0.2 lb.

This spacer is from Buell XB 2 Bearings style rear wheel I bought on Ebay. The milage and year is unknown. The spacer has grinded groove on one end but other than this I can not say if it is bad (see the pictures). I use good spacer without damages on my motorycle and do not need this unit.










2009 Buell XB 12 Scg Flasher Relay (P/N Y0621.MD) - add $3 and 0.2 lb.

This relay is from my motorycle and has about 4000 miles. Condition is OK. I use different LED flasher relay and do not need the original one.






Buell XB LED Flasher Relay GROTE 44893 - add $8 and 0.2 lb.

This is flasher relay for LED turn signals, fits Buell XB socket but do not have mounting tab likewise the OEM flasher relay. I bougt this relay on American Sport Bike online store. It has about 20000 miles annd is in good condition. I use different shape LED flasher realy on my motorcycle and do not need this unit.




2009 Buell XB 12 Scg Bag of Fuses and Relays miscelanous - add $4 and 0.4 lb.

These relays and fuses are from my motorcycle and from another Buell XB motorcycle harness I bought on Ebay. There are maybe 12 relays and a bunch of fuses. Some of the relay might be bad, but most of them worked when I removed them. They have maybe 10000-20000 miles. This is probably going to be good cheap spare parts for somebody who uses OEM style relays. I installed different fuse-relay block on my motorcycle and use different style relays and do not neeed the original relays anymore.




Buell XB Switch Assembly Handlebar Left (P/N N0159.TB) - add $5 and 0.4 lb.

I bought this left switch assembly handlebar on Ebay to take horn signal button out of it. The motorcycle year and mileage is unknown. This unit is in bad condition, the turst signal switch and the horn button are broken, the housing and the headlight button are damaged. Maybe you can use some parts out of this unit.





2009 Buell XB 12 Scg Wiring Harness Case (P/N Y0324.02A8 and P/N Y0345.02A8) - add $5 and 0.2 lb.

This case consists of 2 parts. I took it out of 2009 Buell XB 12 Scg Wiring Harness I bought on Ebay. The mileage is unknown. Condition is not good, one part has crack, both parts have sticky tape resedue.














2x 2009 Buell XB 12 Scg Fuses-Relays Block bases - add $2 for each block.

These are two disassembled fuse blocks from 2009 Buell XB 12 Scg wiring harnesses. One is from my motorcycle and has 25000 miles, another is from wirhing harness I bought on Ebay with unknown mileage. One block has brocken rib (see the picture) but it does not affect functionality. Condition of both blocks is OK. I use different style fuse block with custom wiring harness I built and do not need these blocks anymore.





2x 2009 Buell XB 12 Scg Fuses Block Covers - add $2 and 0.1 lb each.

The covers condition is OK, they have scratches and some dents, but completely functional. One cover is from my motorcycle wiring harness and has about 25000 miles, another cover is from 2009 Buell XB 12 Scg wiring harness I bought on Ebay, mileage is unknown. I use different style fuse block with custom wiring harness I built and do not need these covers anymore.








2009 Buell XB 12 Scg Chopped Wiring Harness (P/N Y0136.5AC) - add $10 and 7 lb.

This is teared apart wiring harness from 2009 Buell XB 12 Scg I bought on Ebay. Mileage is unknown. Most wires are chopped and are not in full length. Most connectors may not have pins insde since I disassembled them. You may use connectors from it or mayme pieces of wires




2009 Buell XB 12 Scg Clutch Lever Switch (P/N C0145.T) - add $1 and 0.05 lb.

This is original clutch lever switch from my motorcycle, it has about 25000 miles. The switch condition is OK, it has pretty worn pin. It worked OK on my motorcycle, but I desided to replace it with new unit to be confedent it will not cause issues and I do not need the original unit anymore.












2009 Buell XB 12 Scg Fuel Injectors Rear (P/N P0027.1AA) and Front (P/N P0026.1AA) - add $40 and 0.4 lb for the pair.

These Injectors are from my motorcycle and have about 25000 miles. Exterior condition is good. I decided to replace them by new OEM injectors when I had troubles with engine idling and AFV. I replaced a bunch of parts in one time so I do not if the issue was related to the injectors. All I can say they ane not clogged, the are not leaking, they open and close.










2009 Buell XB 12 Scg Front Brake Line for ZRL2 8 Pistons Caliper (P/N H1531.8AE) - add $4 and 0.4 lb.

This front brake line is from my motorcycle and has about 25000 miles. Condition is OK, metal parts have some oxidation or contamination on surface, the rubber grommets are unglued from the places and slide freely on the line. I converdet the steering head to Firebolt and use Buell Firebolt front brake line so I do not need the original brake line anymore.














2009 Buell XB 12 Scg Right Side Airscoop (P/N M0903.02A8A) - add $5 and 0.4 lb.

This airscoop is from my motorcycle. It has maybe 10000 miles. The plastic near the back mounting tab is melted and cracked (see pictures). I use different right airscoop from comfort kit and do not need the original part.














2009 Buell XB 12 Scg Lower Belt Guard (P/N M0560.4A8) - add $10 and 0.4 lb.

The lower belt guard is from my motorcycle and has maybe 3000 miles. Condition is very good, has few minor dents and scratches. I ride with chain and with no belt guards and do not need this unit.












2009 Buell XB 12 Scg Upper Belt Guard (P/N M0570.4A8) - add $10 and 0.2 lb.


The upper belt guard is from my motorcycle and has maybe 3000 miles. Condition is very good. I ride with chain and with no belt guards and do not need this unit.










2009 Buell XB 12 Scg Belt Stone Guard (P/N M0561.4A8B) with Standoff DX (P/N C0082.4A8A) and 2x Screws 1/4-20 x 1/2 Torx Truss Head (P/N AA0404.11CXVB) - add $15 and 2 lb.

The Stone Guard is from my motorcycle and has maybe 3000 miles. Condition is good. I ride with chain and with no belt guards and do not need this unit.









2009 Buell XB 12 Scg Tail Screen with Decal, finish anodized Black (P/N M1050.1ASZT) - add $15 and 0.2 lb.

The tain screen is from my motorcycle and has about 4000 iles. Condition is good. I designed and built different tail and do not need the original tail parts anymore.










2009 Buell XB 12 Scg Tail Rear Reflector Assebbly Red, Rear Reflector Bracket (P/N L0541.02A8), Reflector Red (P/N 59259-90), 2x T27 truss Head Screws 1/4-20 x 1/2, 2x Lock Nut Thin Nylock 1/4-20 - add $15 and 0.4 lb.

The Tail Rear Reflector is from my motorcycle. It has about 4000 miles. Condition is OK. Originally it has 3 fasteners (but I took 1 screw and 1 nut from it), so you have to find 1 more screw and nut. I designed and built custom tail and do not need the original parts anymore.










3x 2009 Buell XB 12 Scg Rider Footpeg Bracket Bolts 1/4-20 x 3/4 Hex Socket - add $0.5 and 0.05 lb for each.

These rider footpeg bracket bolts are from my motorcycle. Condition is good. They have maybe 4000 mires. I offset right rider footpeg bracket and use longer screw and do not need the original screws anymore.






6x 2009 Buell XB 12 Scg Screws 1/4-20 x 1/2 Torx Truss Head, Belt Guard Fasteners (P/N AA0404.11CXVB) - add $0.5 and 0.05 lb for each screw.

These screws are from my motorcycle from belt guards. Condition is good. They have maybe 4000 miles. I do not use belt guards and do not need these fasteners.






2009 Buell XB 12 Scg Clutch Cable (P/N 38613-03C) - add $20 and 2 lb.

This is original clutch cable from my motorcycle. It has 25000 miles. Condition is OK. The metal parts have some oxidation. The rupped protective sleeves have rubbed spots (see the pictures).

I use Buell Firebolt triple tree with Firebolt Clutch Cable and do not need the original clutch cable anymore.


















2009 Buell XB 12 Scg Throttle Cables Open (P/N N0307.5AC) and Close (P/N N0308.5AC) - add $10 and 0.4 lb for the pair.

The throttle cables are from my motorcycle and have 25000 miles. Condition of the cables is not good but they worked for me. They have melted, rubbed and teared spots (see the pictures). I do not use them becasue of I installed Firebolt Top Tree with Firebolt therottle cables.






























Buell XB 54 mm Steering Damper Fork Clamp, NEW - add $5 and 0.4 lb.

I bought this clamp on Amazon. Inside diameter is 54 mm. The threated hole is M8. Condition is NEW, never installed. I bought this clamp when I built my steering damper but did not use it and machined my own different geometry bracket.

You might be able to use it if you want to build steering damper

https://www.buellxb.com/forum/showthread.php?53843 -DIY-Cheap-steering-damper








If you are interested you can send me private message. If you wish to buy the parts you need to give me your name, your shipping address and your email address. I will estimate shipping service cost using your address on USPS web page and add this cost to the parts cost. Then I will send you payment request on your email address from PayPall. Once I get payment I will send the parts on next Saturday (I'm not sure I will be available to sent it another day of the week).

And finally, do not guess shipping cost, use online estimation tool and package information I provided to you to prevent confusion. The parts go to the person who are ready to pay first. If after contacting with me you did not respond on my last email within 24 hours check this post first because of I may sold the parts for somebody else and I will post this information here.
Top of pagePrevious messageNext messageBottom of page Link to this message

Xbuell12s
Posted on Sunday, June 07, 2020 - 10:05 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I'm interested in Airbox, Belt Drive, Rear Brake Pedal, Right Side Airscoop, Shift Pedal, Wiring Harness. Please let me know what you want for the lot shipped to 55033. Also, I didn't see if you had any rear XB fans but I would be interested in those as well.

Thanks,
Bill
Top of pagePrevious messageNext messageBottom of page Link to this message

Tpehak
Posted on Sunday, June 07, 2020 - 11:55 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Hello Bill, thank you for inquiring. I have responded on your email.
Top of pagePrevious messageNext messageBottom of page Link to this message

Tpehak
Posted on Monday, June 08, 2020 - 03:26 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

The followed items including the Airbox Assembly are sold:

- Airbox Assembly
- Drive Belt
- Brake Pedal
- Shift Pedal
- Airbox Cover

I do not ship other items because of I do not have time for now. They are available only here in West Seattle for local pickup by 30% increased price.
Top of pagePrevious messageNext messageBottom of page Link to this message

Mc_hammered
Posted on Monday, June 08, 2020 - 04:06 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I'm interested in these items:

4x 2009 Buell XB 12 Scg 1/4- 20X11/16 shoulder torx screw
Left and right subframe sections
4x Flyscreen Bolts (P/N AN1005.3FSS)with Washers (P/N CB0009.02A8)
6x 2009 Buell XB 12 Scg Screws 1/4-20 x 1/2 Torx Truss Head

Thanks,

Winston
Top of pagePrevious messageNext messageBottom of page Link to this message

Tpehak
Posted on Monday, June 08, 2020 - 04:43 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Please note, the Airbox is sold and I do not ship another items separately. Another items I posted here was only to encourage you to buy the Airbox buying few parts in bundle. If you are OK to pick up the items locally here in West Seattle it will cost you 30% more than I posted here.
Top of pagePrevious messageNext messageBottom of page Link to this message

Smorris
Posted on Tuesday, June 09, 2020 - 02:34 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

waste of space
Top of pagePrevious messageNext messageBottom of page Link to this message

Tpehak
Posted on Thursday, June 18, 2020 - 08:09 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

The followed items have been sold:

-Belt guard fasteners
-Belt stone guard
-Clutch cable
-Clutch switch
-Flasher relay
-Fly screen bolts
-Fly screen translucent Blue
-Front module left
-Front module right
-Front turn signals
-Headlight assembly
-Headlight hardware
-Headlight mount bracket
-Lower belt guard
-Mirrors
-Passenger foot pegs with hardware
-Rear turn signals
-Truss torx screws
-Upper belt guard
-Belt guard hardware and fasteners
Top of pagePrevious messageNext messageBottom of page Link to this message

Shoggin
Posted on Thursday, June 18, 2020 - 08:22 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

You spent more time taking and posting massive pictures that it ever would have taken to toss stuff in a USPS box for the mailman to pick up from your house.

GLWS, LOL.
Top of pagePrevious messageNext messageBottom of page Link to this message

Tpehak
Posted on Friday, July 10, 2020 - 09:25 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Chopped Tail for LED strip with license plate bracket are sold.
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Password:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration