| Author | Message | ||
     Skipbarberman |
Did a couple of XB9Rs over, and have a bunch of parts to get rid of. Instead of posting on eBay with exorbitant fees, I figured I'd do some forum members a service and try to unload a bunch of it here inexpensively. All parts are USED and working when removed unless stated otherwise. I have to name a few (rattling off the top of my head) from memory: - (1) 2003 cast silver front wheel w/ bearings/seals (~2k mi) - (1) 2003 cast silver rear wheel w/ bearings/seals (~2k mi) - (1) original Buell Pegasus/comfort front seat - (1) original Buell Pagasus/comfort pillion seat - (1) 2005 stock, single outlet muffler - (1) modified D&D muffler - OPEN EXHAUST - (1) XB Firebolt rear sub-frame - (1) 2003 fuel pump (loud - as they often are, but works fine) - (1) 2003 XB9 throttle body w/ injectors (working when removed to install XB12) - (1) 2005 XB9 stock stainless header - (1) 2003 front brake rotor - (1) 2003 front brake caliper - (1) 2003 rear brake caliper - (1) complete 2003 (11mm) belt/pulley/tensioner setup (belt is in VGC) - (1) set of LSL bars for Firebolt conversion - (1) Buell XB Tail bag - (1) High Beam unit - (1) Oil Pump (~9,600 mi) - (1) set of std. bore pistons/ring/jugs (~9,600 mi) - (1) complete set of 2003 XB9R camshafts - (1) set of rider foot pegs - (1) stock 2003 shock (~9600 mi) - (1) stock rear caliper (Message edited by skipbarberman on April 26, 2020) | ||
| Skipbarberman |
Whoops, if intereested.....skipbarberman at geemail dot com. | ||
| Cupcake_mike |
sent you an email (mikeftbl52) | ||
| Smorris |
email to u this AM | ||
| Skipbarberman |
Pegasus front and rear seats - SOLD (Message edited by skipbarberman on April 27, 2020) | ||
| Skipbarberman |
While dusting off the tail bag, found a TANK BAG. | ||
| Skipbarberman |
Tank/Tail Bags - SOLD (Message edited by skipbarberman on April 27, 2020) | ||
| 97bueller |
Pictures of exhaust please. clapage87@gmail.com | ||
| Skipbarberman |
Still have..... - (1) 2003 cast silver front wheel w/ bearings/seals (~2k mi) - (1) 2003 cast silver rear wheel w/ bearings/seals (~2k mi) - (1) 2005 stock, single outlet muffler - (1) modified D&D muffler - OPEN EXHAUST - (1) XB Firebolt rear sub-frame - (1) 2003 fuel pump (loud - as they often are, but works fine) - (1) 2003 XB9 throttle body w/ injectors (working when removed to install XB12) - (1) 2005 XB9 stock stainless header - (1) 2003 front brake rotor - (1) 2003 front brake caliper - (1) 2003 rear brake caliper - (1) complete 2003 (11mm) belt/pulley/tensioner setup (belt is in VGC) - (1) set of LSL bars for Firebolt conversion - (1) High Beam unit - (1) Oil Pump (~9,600 mi) - (1) set of std. bore pistons/ring/jugs (~9,600 mi) - (1) complete set of 2003 XB9R camshafts - (1) set of rider foot pegs - (1) stock 2003 shock (~9600 mi) - (1) very light weight fiberglass under-tail, with directional indicators painted blue | ||
| Uly4me |
how much for the d&d muffler | ||
| Cvc |
Pics on LSL bars . Interested in rider foot pegs and camshaft. If you had a front head and piston too I’d be interested. Thanks CV Pm sent on contact info | ||
| Skipbarberman |
Quite a few questions about/inquiries on the D&D muffler. It is gutted, so effectively straight pipes. Looking for $20 + actual shipping   (Message edited by skipbarberman on April 30, 2020) | ||
| Skipbarberman |
CVC - Pics on LSL bars to follow. I have the original OEM jugs/pistons and cams. No heads | ||
| Skipbarberman |
LSL bars only attached   | ||
| Skipbarberman |
Rider footpegs with brackets, $50 plus actual shipping  (Message edited by skipbarberman on April 30, 2020) (Message edited by skipbarberman on April 30, 2020) | ||
| Skipbarberman |
Found some other stuff too XB/1125 Front rotor XB/1125 Rear rotor XB Rear Shock 2003 plastic belt guards 2003 XB complete airbox (base-plate, snorkel, OEM race filter (K&N) and cover) | ||
| Bluell |
Is there an exhaust actuator in the air box? I don’t need the air box just the actuator. | ||
| Skipbarberman |
Sadly, no. Both XB9s, so no actuator. (Message edited by skipbarberman on April 30, 2020) (Message edited by skipbarberman on April 30, 2020) | ||
| Skipbarberman |
All - hit me with requests....if I have it, I'm happy to get it out ASAP. | ||
| Spuds |
Hey there... Looking for xb-r stuff: qty 2 -- rider footpeg pins, springs and c-clips Front signal lights Seat lock backing plates (both of them) relay box cover Let me know if you have anything. Shipping would be to Ottawa, Ontario. Thanks | ||
| Skipbarberman |
Spuds - See above rider footpegs pics. I will be shipping from Melrose, NY (not far, few hours away) zip code is 12121. I can get them out tomorrow if interested. - Sean | ||
| Skipbarberman |
Still have..... - (1) 2005 stock, single outlet muffler - (1) modified D&D muffler - OPEN EXHAUST - (1) XB Firebolt rear sub-frame - (1) 2003 fuel pump (loud - as they often are, but works fine) - (1) 2003 XB9 throttle body w/ injectors (working when removed to install XB12) - (1) 2005 XB9 stock stainless header - (1) 2003 front brake rotor - (1) 2003 front brake caliper - (1) 2003 rear brake caliper - (1) complete 2003 (11mm) belt/pulley/tensioner setup (belt is in VGC) - (1) set of LSL bars for Firebolt conversion - (1) High Beam unit - (1) Oil Pump (~9,600 mi) - (1) set of std. bore pistons/ring/jugs (~9,600 mi) replaced with NRHS 1050 kit - (1) complete set of 2003 XB9R camshafts - (1) set of rider foot pegs - (1) stock 2003 shock (~9600 mi) - (1) very light weight fiberglass under-tail, with directional indicators painted Battle Blue | ||
| Skipbarberman |
- (1) 2005 stock, single outlet muffler - (1) modified D&D muffler - OPEN EXHAUST - (1) XB Firebolt rear sub-frame - (1) 2003 fuel pump (loud - as they often are, but works fine) - (1) 2003 XB9 throttle body w/ injectors (working when removed to install XB12) - (1) 2005 XB9 stock stainless header - (1) 2003 front brake rotor - (1) 2003 front brake caliper - (1) 2003 rear brake caliper - (1) complete 2003 (11mm) belt/pulley/tensioner setup (belt is in VGC) - (1) set of LSL bars for Firebolt conversion - (1) High Beam unit - (1) Oil Pump (~9,600 mi) - (1) set of std. bore pistons/ring/jugs (~9,600 mi) replaced with NRHS 1050 kit - (1) complete set of 2003 XB9R camshafts - (1) set of rider foot pegs - (1) stock 2003 shock (~9600 mi) - (1) very light weight Ermax fiberglass under-tail, with directional indicators painted Battle Blue (Message edited by skipbarberman on May 10, 2020) | ||
| Skipbarberman |
Also have a stock XB shifter with linkage if anyone is interested. PM me with any parts requests. I have a fair amount of stuff. | ||
| Skipbarberman |
Bumping for any offers. | ||
| Mstrfrz |
I might be interested in that shifter if it can work on an X1 | ||
| Skipbarberman |
Bumping. PMs replied to. | ||
| Skipbarberman |
Next up, front & rear brake rotors... Front (4.80mm) Rear (4.92mm)   | ||
| Skipbarberman |
Rear (4.92mm)   | ||
| Mstrfrz |
how about the fuel rail/manifold/connect to the injectors thingie? |
