| Author | Message | ||
     Jccdog |
No motor no title. Frame with swing arm $300, front end $200 wheels $200 Supertrapp exhaust $150 gas tank $75 just let me know what you need. Prices do not included shipping  | ||
| Hawgford |
what color is fender and screen,actual, if paint over,i'll pass, but i can use the stock mirrors grips and levers,hawgford@windstream.net | ||
| Hawgford |
Also if somebody wants the muffler i would get the pipe and better pictures of that would be great,to my email... | ||
| Mhlunsford |
I am interested in front end looks like inverted forks and tripple fit an M2. Shipping to 30122 Georgia. Mark Lunsford. | ||
| Nhtuber |
If there is a front fender and Mark isn’t taking it, I’d be interested if in good condition. (I think more pictures would help you sell stuff) | ||
| Jccdog |
Finder is carbon fiber. Yes Mark the front end is inverted I will check on shipping. I will get more pictures Tuesday that's when I will be back in the shop. | ||
| Mhlunsford |
Sounds good. | ||
| Redneckrivierabueller |
PM sent re:shock and bracket | ||
| Jccdog |
 | ||
| Jccdog |
 | ||
| Jccdog |
 | ||
| Jccdog |
 | ||
| Jccdog |
 | ||
| Jccdog |
 | ||
| Jccdog |
Seems I have the frame over priced so I will try again $100 frame and swing arm | ||
| Ceigenberger |
Interested in the muffler but would like pics of the outlet yenko23@hotmail.com | ||
| Bluelightning |
is the muffler the 2" inlet or the 2.5"? | ||
| Mhlunsford |
Pretty sure the cyclones were all 2.5. | ||
| Normthenomad |
The exhaust header on the 2.5 pointed straight back, the 2" required a 90 degree elbow on the muffler. This looks like a 2" header to me. | ||
| Hawgford |
ceigenberger if you take the muff i will take the pipes to help JC out.. posted this already and have already bought a few parts from him, no worries,,THANKS CHAD! own 200 cyclone its 2.5...My pipe is rusted and has weld repairs from ??? so this insider is a no brainer.. chad text me whenever | ||
| Mhlunsford |
I have a 2000 m2 exhaust is 2.5. The headers I believe that are 2 are the ones that have a heat shield attached to the rear runner that goes over the top of the frame: S2 S1 and early M2s I think. But for sure everything 2000 and up was 2.5. | ||
| S1owner |
The frame will be a wall hanging no one will buy it with no title and shipping is crazy. Ask me how I know lol | ||
| S1owner |
And I gotta ask where is the title and motor???? | ||
| Hawgford |
S1owner.. you are incorrect on your assumptions. just some lil known facts.. a title for a frame is NOT required in alot of states,,of course depending on the year.you can get a bonded title anywhere if need be and one isn't required for a track bike.. Chad posted at the top that the motor and some misc was used for a build.Most certainly the neck could be used for a project ,i bet its a .875 stem so anything would fit and a cup change would fit 1" plus theres raked cups out there ,so the frame has value.you should have asked on here about frame shipping before you had a bad experience as they can be shipped very cheaply via Fastenal and greyhound bus,and even had motors/big items shipped stealership to stealership for reasonable cost. Ask ME how i know,lol... i am still interested in this pipe if someone takes the can.Mine is very rusty[?} and has had a pipe diameter repair. debating coating vs polish vs replacing. | ||
| Bluelightning |
If the original poster will confirm that the inlet to the muffler is 2.5", I'll take that. It looks to be by the updated front hanger, just don't want to buy without confirming from him. | ||
| Hawgford |
BLUE I have contacted Chad about some other parts and he is good about gettin back but i think only in bike shop 1-2 days a week,suggest you PM. Unless another spoke up before me that i missed,i wanted the pipe only so this might come to fruition. | ||
| Jccdog |
The motor is on a bench I am rebuilding it to go on a sporty softtail frame. | ||
| Jccdog |
Sorry Blue the exhaust is sold | ||
| Jccdog |
S1 I checked the frame shipping is $140 I am asking $100 for the frame and swing arm it also has drive belt, rear master cylinder, rear break peddle, all pegs and top motor mount I don't think I can make it any better | ||
| S1owner |
Oh I get it I have a frame with no title hanging on my wall. Most states require the frame vin to match the title. And a bonded title is not cheap either. Sad to see abuell get scavsnged | ||
| Hawgford |
JCCdog,May i ask where you got the frame ship quote? Just tryin to help,posted up about using Fastenal and Greyhound bus.. I never know if my posts go through or ?. i know either shipper it just needs a stout tag on it,nothin more really but you might want to duct tape some " corners" on it,. | ||
| S1owner |
Hawdford Fastenal is hit or miss wether they ship or not and where they will ship too. They also fluctuate on how much they charge. I have no less then 8 stores near me only one will ship but it is very selective to where. They also charge whatever they want. Greyhound might work but like me I would have to drive 30 minutes into downtown mpls pay to park to goto greyhound. Add that to cost of shipping and its not worth it | ||
| Jccdog |
That quote was UPS from KY to CT |
