| Author | Message | ||
     Cosmovandalay |
Got a '99 X1 carbon-kevlar ed. that had been sitting for >2 yrs with gas in tank; I picked up a pump and regulator kit before I saw just how bad the pump chassis was. The gas had actually eaten through the wiring insulation on the pump chassis inside the tank! The tank is totally sludged up also, but I think some detergent and a pressure washer can save the tank. | ||
| Dyerschaos |
I bought mine at Napa auto parts It’s a delfi part no. Cfe0096 It’s the motor only that you will use and will have to separate your old one and mate ithe new pump motor . It’s fairly simple . And you will save a bunch of money . | ||
| Cosmovandalay |
I actually already have the motor and regulator...I need the actual pump body and wiring that the electric motor plugs into because mine was destroyed by age and bad gas. | ||
| Xbuell12s |
I found a NOS one on eBay. Else, SPHD had one when I looked several months ago. | ||
| Cosmovandalay |
I've seen several on ebay for $219 or there abouts, but I only need the housing, not the whole pump, plus that's only about $100 less than the NIB kit from SPHD...guess I'll go ahead and not be cheap. | ||
| Screamer |
Cosmo, I may have one - PM sent. |
