| Author | Message | ||
     Purpony |
great upgrade for tube framed bikes. Includes freshly powder coated XB rocker box covers, rocker boxes, and the pcv valves. $150 plus shipping.      | ||
| Xldevil |
Hey. Can the rockers be used as spare parts for a pre rubber (2000) Sportster?How many miles are they in use? I know ,the covers from an XB can not be used on my XL,but I could use them as spare parts for my M2, which already has XB covers. Would you ship to Germany? | ||
| Purpony |
Hi- not sure on the sportster. Im not up to speed on all the changes and such on the sportys. These covers came off a bike with 16,000 miles. I can ship to Germany. Ill send you a PM with shipping costs. thanks | ||
| Phelan |
XLDevil, the covers will physically bolt to the motor fine, but 03-under XL frames do not have clearance to remove the 1 piece uppers from the motor without removing the whole motor, thus the 3 piece design is inevitably the only thing that works in the stock frame. You can, however, drill the stock upper and mount a grommet and XB PCV valve, if your goal is the gain top mount breathers. Lafayette did this years ago on his Blast. | ||
| Xldevil |
Hi Phelan. Thank you for that good tip. My Xl‘s breathers are routed into a catch can and that is fine for me. I once tried to install the XB covers to this motor but,like you mentioned frame clearance was not enough. I do not think to bore out or drill the upper covers is a good idea on my XL,because they are chrome plated. I am afraid the chrome would chip off.  | ||
| Dgruber58 |
Sent a PM. Are these still available? | ||
| Purpony |
sorry, these have been SOLD. thanks |
