|Posted on Friday, June 08, 2018 - 07:10 pm: ||
Factory race exhaust pulled from a 98 S1W. 2.5Ē outlet header and factory race muffler. The muffler needs repacked, it has 10k miles and appears it has never been serviced...the rivets appear to be original. The outlet of the header cracked and was welded by the po many years ago and has held good since then. The bike was knocked over in storage and scratched the header. Iíve included good photos included on my eBay auction to show the overall condition. The system is priced at what I believe is about half the cost of a system in perfect condition due to the scratches on the side and the welding at the bottom even though the weld really isnít visible when the system is installed on the bike but we know itís there.
Itís also listed on eBay: search Buell S1 Race Exhaust. Iíll sell to badweb members direct for $350+shipping. Itís listed for higher on eBay. Donít know why anyone here would want to buy from ebay, but it can be purchased there if preferred but higher asking in order to cover eBay and pp fees. eBay, however, would be the best route for international buyers since we can use ebays international shipping program which ends up netting the buyer a savings even after eBay fees so there is that. International buyers, PM me FIRST and we can work out the price and go the eBay route.
PM me with questions. I have several photos included on my eBay auction
|Posted on Saturday, June 09, 2018 - 09:21 am: ||
Dayum, that's a hell of a deal.
It'll fit any 95-98 tuber with the rounded, S-bend header. It will NOT fit later tubers with the angled, T-bend header.
|Posted on Tuesday, June 12, 2018 - 08:47 pm: ||