| Author | Message | ||
     Ten_racing |
I am working on an interesting racing project. My local club Racing allows up to 900cc push rod 2 valve air cooled four stroke Motors in our ultralight GP class... I have one of our old Road racer 883's from the AMA 883 Twin Sport Era. I want to put my 883 Motor in a tube frame chassis, Don't need title (as long as it isn't stolen) I have a front end, so basically I need frame, mounts, tank, seat, oil tank, swingarm, shock and rear wheel. | ||
| Ten_racing |
Probably easiest to email me directly tenracing@gmail.com | ||
| Brother_in_buells |
Here is a m2 frame, http://www.badweatherbikers.com/buell/messages/476 23/812446.html?1503656503 | ||
| Loose1 |
sent you an email Brett. Matt | ||
| Rtlll |
Hi Ten Racing, I may have some parts you can use. I just parted a '95 S2 and have wheels, forks, an Aluminum later model swing arm assy. S2 plastic fuel tank and some other parts. Also have a separate S2T bare frame. No title but not stolen either. If you'd like more detail send me a email address and I'll send you pictures. I'll send you a PM also. Thanks, Rick, rtlll@yahoo.com | ||
| Jeffb |
I have a 2002 X1 frame, swing arm and forks, plus a bunch of little parts. Frame is clean with clean title. I'm in Westby WI and would possible meet you somewhere towards you. Email me for pics. baileyj76@hotmail.com |
