| Author | Message | ||
     09cr |
Hey guys, first off I want to apologize to anyone who contacted me previously when the engine was complete. For whatever reason I seem to have a lot of problems with the PM feature on this site. Best way to communicate with me is to either reply directly to this thread or email me direct at dr_bugasm@hotmail.com That being said, I decided to break the engine down into parts so now I can ship them. I generally ship two-three days after payment. All parts are in good usable condition unless I mention otherwise. All parts are best offer, I'm not trying to make a ton of money here, just hoping to get back what I bought the original engine for. If I can fit the parts in a flat rate box I will do so, if not it'll get shipped UPS. Ok let's begin! Throttle body mounts:  Injectors:  Thermostat:  Throttle bodies- note: does not come with the solenoid mounted under them, I think maybe its an idle air control motor?  Headers   Sensors  Valve covers- one of them has some damage, but it's not cracked.   Stator cover/stator, has some scratches on the cover itself.    Rotor   Crankshaft/pistons- crank is in perfect shape as are the rods, one of the cylinders got some moisture in it, thus one of the pistons has some discoloration on the side which I pictured.    Clutch unit  Left side case    Transmission  Timing chains/guides/gears  Front sprocket  Clutch cover- has some scratches on it    More to come soon | ||
| 09cr |
Cylinder, the other one had enough moisture in it to pit the liner so it was no good, but this one is fine.    Cylinder heads- because of the moisture the valves will have to be removed and cleaned up, but they are in otherwise great shape.    Wiring harness  Random engine gears  Cut down Micron can, finish is a little scruffy, would probably buff up nice. 2.5" inlet 16" overall length.   As I mentioned before, just reply directly to this thread or email me with everything that you want and what you want to pay for them and we'll make a deal. | ||
| K12pilot |
Charging rotor Fuell bits Thank you | ||
| 09cr |
If you could do me a favor and list exactly which parts you need and what you would like to pay for them total. If you'd feel more comfortable emailing me direct you can do that as well. my email: dr_bugasm@hotmail.com thanks Sky | ||
| 09cr |
Apparently I can't edit a post if it's too old, but I wanted to update people on what is left, I also wanted to add prices, so here you go: Starter $30 shipped  Headers, the oxygen sensors are gone though. $75 shipped. Valve covers $30 shipped Stator: if you just want the stator itself and not the case part I can sell that cheaper $70 shipped Crank and pistons $85 shipped Timing chains/gears $40 shipped Front sprocket $25 shipped Transmission $60 shipped Cylinder heads $100 shipped for both Thanks for looking guys. | ||
| Rick_fears |
Messaged about the micron. | ||
| Scallywag |
In search of a dipstick if you have one? | ||
| Rick_fears |
Payment sent for the micron. Shipping details in email. Thanks! | ||
| 1313 |
Email sent much earlier this morning. Forgot to ping here, 1313 | ||
| Froggy |
If that starter is still available I'll take it. PM on the way. | ||
| Dennis_c |
Miles on motor? | ||
| Xr75044 |
do you have left front motor mount | ||
| Dennis_c |
I will take the heads if that's not a bad spot on the cams in the right picture some 1125 did have bad cams. How many miles on the motor? | ||
| Xthorx91 |
Is the Crankshaft, pistons, and rods still available? | ||
| Blownharley |
Are the heads still for sale?? Thanks Peter |
