| Author | Message | ||
     Readyxb |
$565 USD. For sale is a fully tunable/programmable DDFI-3 EBR ECM, professional tuning software, and USB programming cable for 2008-2010 models of Buell XB12/1125R/1125CR. Retails for $630 without a programming cable from IDS. Includes the professional Buell/EBR/IDS factory tuning software - PCM Tool v2.3.2.4 by IDS - along with a library of calibrations, on the original CD; and a hard copy of the software user manual (I also have a PDF version). The USB datalink programming cable is from EBR and has a genuine FTDI chipset. You get the following calibrations to use as-is, to modify, or with the PCM Tool tuning software, to tune your own ECM if needed: - 2008-2009 XB1203 Designed for stock motor with Buell Pro-Series exhaust & K&N filter - 2008-2009 XB1203 Designed for stock motor with Drummer exhaust & K&N filter - 2010 XB1203 Designed for stock motor with Drummer exhaust & K&N filter - 2008-2009 XB1203 Designed for stock motor with Jardine exhaust & K&N filter - 2010 XB1203 Designed for stock motor Jardine exhaust & K&N filter - 2008-2009 XB1203 Designed for stock motor, stock US exhaust & K&N filter - 2008-2009 XB984 stock US spec motorcycle - 1125R stock motor, Barker’s exhaust & pump gas - 2009-2010 1125R stock catalyst muffler. Closed loop fuel enabled. - 1125R stock motor, FMF exhaust & pump gas. - AMA Moto-GT base cal. Designed for motor with 68mm velocity stacks, exhaust with stock headers, long secondary pipes, and slip-on muffler. Sunoco 260 GTX Fuel. - 1125R stock motor, HMF exhaust & pump gas - 2008 1125R stock non-catalyst muffler. Closed loop fuel enabled. - 2009-2010 1125R stock non-catalyst muffler. Closed loop fuel enabled. - 1125CR stock motor, Barker’s exhaust & pump gas - 2009-2010 1125CR stock catalyst muffler. Closed loop fuel enabled. - 1125CR stock motor, FMF exhaust & pump gas - 1125CR stock motor, HMF exhaust & pump gas - Daytona Sportbike cal for 1125CR. Designed for stock motor, EBR exhaust & pump gas - Daytona Sportbike cal. Designed for stock motor, EBR exhaust & Sunoco 260 GTX fuel - Daytona Sportbike cal. Designed for stock motor, EBR exhaust & pump gas The CD also has DDFI-2 race calibrations for 2003-2007 XB, but the ECM is for DDFI-3. To summarize, sale includes: - EBR DDFI-3 Race ECM - IDS Tuning software on CD - USB programming cable NOTE! You must load in a correct base calibration profile for your bike model (XB vs 1125) and also perform a TPS "Reset" after installing the ECM. Sale is for 48 US states please, from PayPal verified addresses only. PM me to purchase. Thank you!   | ||
| Roconroad |
do you still have the ecm for sale? |
