| Author |
Message |
    
Shawns
| | Posted on Friday, August 14, 2015 - 10:58 pm: | 
|
Pm'd ya |
2stang
| | Posted on Sunday, August 23, 2015 - 10:42 am: |
|
TTT |
Mansolo
| | Posted on Friday, August 28, 2015 - 02:38 pm: |
|
Hi!, I'm interested in the ZTL2 caliper, still avaliable??
Thanks
Pm sent |
Zac4mac
| | Posted on Saturday, August 29, 2015 - 12:26 pm: |
|
Joe, thanks for the dry-brake line.
Definitely an option the RS should have come with.
Z |
2stang
| | Posted on Saturday, August 29, 2015 - 02:41 pm: |
|
Z- you're welcome. If I didn't have an R1 front end on my bike I would've kept it for myself.
Mansolo - sent you an email |
Shawns
| | Posted on Saturday, August 29, 2015 - 08:10 pm: |
|
How are the heads on that motor? I have at least 1 valve that is not moving. |
2stang
| | Posted on Friday, September 11, 2015 - 11:15 am: |
|
---------Updated list------------
-Buell race front rotor, older design, has notches on I.D., 5mm thick. Has been tracked, but still runs true, will prep/de-glaze. ----$275
-EBR front rotor mounting kit, used on above front rotor.-----$100
-Drummer SS slip-on, good shape, low miles. Tip is bent, will try to straighten before sale.----$500
-Power commander V with supposed custom map for Drummer slip-on. Never ran bike. Back of unit missing. Will connect to computer and verify map.----$ make offer
-K&N 1125 air filter.----$25
-Showa race shock with Hypercoil 550 Lb/in spring. Just freshened, new seals and nitrogen recharge. Also comes with Showa 575 spring.----$650
-Ohlins TTX36 shock with 10.5 N/mm spring. Shock is in good shape, no leaks.----$850
Most of these parts came off a bike I'm parting out. All part conditions are based on what I see. I did not ride the bike. I've been a machinist and motorcycle mechanic for 10+ years, so my knowledge is high.
I have a ton of stock parts available as well, including an engine. Engine has cracked swing arm pivot, so needs cases, but can part out.
Thanks
Joe |
Shawns
| | Posted on Monday, September 28, 2015 - 10:03 pm: |
|
Looking for a clutch cover with piston/slave cylinder |
2stang
| | Posted on Tuesday, September 29, 2015 - 11:28 am: |
|
Shawns- Im saving the cover for spare for my race bike. I have a stock slave if you're interested. |
28tudor
| | Posted on Saturday, October 17, 2015 - 12:50 pm: |
|
do you have any of your stock mirrors left hanging around by any chance? |
2stang
| | Posted on Thursday, November 05, 2015 - 11:34 am: |
|
Still parts for sale |
2stang
| | Posted on Tuesday, November 10, 2015 - 10:34 am: |
|
rotor ebr mounting kit sold |
Theshinenz
| | Posted on Thursday, July 28, 2016 - 04:12 am: |
|
any of of shocks still available? |
|
